標題: [教學] 3D printer在Win8下安裝Driver的方法 [打印本頁]

---

作者: Offer    時間: 2013-8-17 14:07     標題: 3D printer在Win8下安裝Driver的方法

因有網友話裝driver有困難,參考自Arduino官方討論區 http://forum.arduino.cc/index.ph ... 7&topic=94651.0

我試過work的,因為大部份3D printer也是用Arduino的

1. Windows Key + R
2. Enter shutdown.exe /r /o /f /t 00
3. Click the "OK" button
4. System will restart to a "Choose an option" screen
5. Select "Troubleshoot" from "Choose an option" screen
6. Select "Advanced options" from "Troubleshoot" screen
7. Select "Windows Startup Settings" from "Advanced options" screen
8. Click "Restart" button
9. System will restart to "Advanced Boot Options" screen
10. Select "Disable Driver Signature Enforcement"
11. Once the system starts, install the Arduino drivers as you would on Windows 7

Steps to install driver after Driver Signature Enforcement has been disabled:
1. Right click the Unknown Device in Device Manager
2. Select Update Driver Software
3. Select Browse my computer for software
4. Click Browse button
5. Select the Drivers folder under the location of your Arduino software installation. (Do not select the FTDI folder inside the Drivers folder)
6. Click OK
7. Click Next