作者: kinfun 時間: 2017-9-24 01:29 標題: Prusa i3 MK3
http://www.prusaprinters.org/ori ... 67645020.1505377445
出MK3啦
作者: Offer 時間: 2017-9-24 08:39
本帖最後由 Offer 於 2017-9-24 08:50 編輯
出MK3啦
kinfun 發表於 2017-9-24 01:29
optical filament encoder not only detects the presence of a filament, but also its movement.
MK3 will be a little more expensive at $749, it is a great deal with all the cutting edge features. MK2 will remain with a $100 lower price of $599.
作者: hon2013 時間: 2017-9-24 23:46
https://youtu.be/UYO1Coywb1U?t=1572
作者: hon2013 時間: 2017-9-24 23:53
Our test prints came out incredible. We initially thought that they would beat this year's MK2S print. However, after the judging was complete, the MK3 fell behind its sibling by a couple points in our scoring. Although, we have to remember that these were the only two prototypes the Prusa team had. They had not yet had time to fully tune these machines before rushing them to us. It is very likely that, by the time you are reading this, the final version will be ready to go and our future testing will see the points add back on.
https://makezine.com/product-review/prusa-i3-mk3/
作者: gorto 時間: 2017-9-26 00:02
We have over 30 000 MK2s in the wild now. Unfortunately, a full upgrade is not possible (and we have really discussed this extensively) due to the new frame and switching to 24V. We tried really hard, but basically, all parts would end up replaced. So we came up with the second best option, the MK2.5 upgrade. It gives you the best features of magnetic bed with spring steel sheet, whole new extruder head with Bondtech and Noctua fan goodness and also the P.I.N.D.A. 2 bed leveling sensor and filament sensor. The retail MK2 to MK2.5 upgrade price is $199. If MK2S was bought during the last 30 days before this release, it is just $99. If you bought MK2/S before, ever, it will be $149 for you. I know it’s a really great deal but the magnetic heatbed and the extruder improvements are extremely useful and we want to spread them rapidly.
http://www.prusaprinters.org/original-prusa-i3-mk3-bloody-smart/
作者: Offer 時間: 2017-9-26 13:09
We have over 30 000 MK2s in the wild now. Unfortunately, a full upgrade is not possible (and we have ...
gorto 發表於 2017-9-26 00:02
你会入手MK3?
作者: ustkl 時間: 2017-9-26 14:21
回覆 5# gorto
MK2 賣左成30000台
所以呢, 唔好歧視用打印件為結構的機器
作者: gorto 時間: 2017-9-26 18:51
你会入手MK3?
Offer 發表於 2017-9-26 13:09
我準備入手 Mk2.5 upgrade kit，將我部 Mk.2 升級。
作者: samkee 時間: 2017-9-26 20:28
我部 MK2S 連四色頭上星期五先送到，星期一就出 MK3
一於買埋佢
作者: qkuser 時間: 2017-9-27 23:51
回覆 9# samkee
咁你應該有 coupon 買 mk3 , 扺好多
作者: kinfun 時間: 2017-9-28 23:16
我部 MK2S 連四色頭上星期五先送到，星期一就出 MK3
一於買埋佢
samkee 發表於 2017-9-26 20:28
Multi唔係話十一月先出貨咩?
作者: 綠袖子 時間: 2017-9-29 09:25
回覆 9# samkee
其實玩MK2+四色頭好玩D，定係直上MK3好D？
作者: samkee 時間: 2017-9-29 09:50
回覆 samkee
咁你應該有 coupon 買 mk3 , 扺好多
qkuser 發表於 2017-9-27 23:51
我今年 4 月頭 order，等到9月先出貨。
作者: andyngo 時間: 2017-9-29 10:21
SURE MK3
作者: qkuser 時間: 2017-9-29 10:26
屎忽痕 , 入左部mk3 kit
作者: kinfun 時間: 2017-9-29 10:47
我都諗住買部mk3
作者: alancck 時間: 2017-9-29 11:31
唔係好睇得明佢嗰價錢，啫係一部單頭mk2要大約700美金哦，另加4入一出嘅"配件"，就另加300美金哦
係未咁計哦作者: hon2013 時間: 2017-9-29 12:23
本帖最後由 hon2013 於 2017-9-29 12:31 編輯
http://shop.prusa3d.com/en/print ... terial-upgrade.html
4入一出 未計運費 USD299
with 4x Bondtech gears、E3D V6、motors + electronics
計落唔貴喎！
作者: mfai 時間: 2017-10-2 22:27
MK3 kit易唔易砌 ?新手玩唔玩得到
作者: Offer 時間: 2017-10-2 23:23
MK3 kit易唔易砌 ?新手玩唔玩得到
mfai 發表於 2017-10-2 22:27
新手買成品啦
作者: alancck 時間: 2017-10-2 23:55
新手買成品啦
Offer 發表於 2017/10/2 23:23
作者: ustkl 時間: 2017-10-3 00:12
回覆 21# alancck
"cal野嘅系統" 都係一個技術演示的 gimmick, 我唔信Mk2/3 的設計砌好後會左右唔對稱。
作者: 綠袖子 時間: 2017-10-3 07:25
回覆 15# qkuser
套kit可以寄黎香港？計埋搵費駛唔駛7k埋單？
作者: qkuser 時間: 2017-10-3 08:43
回覆 23# 綠袖子
係,直寄香港,總數HKD $6744.x .
作者: 綠袖子 時間: 2017-10-3 11:55
回覆 24# qkuser
呢個價係正價？定係有early bird價？
作者: qkuser 時間: 2017-10-3 12:06
回覆 25# 綠袖子
官網 preorder 價 , 11月先開始發貨,我希望聖誕前有机玩。
作者: mfai 時間: 2017-10-3 14:48
新手買成品啦
Offer 發表於 2017-10-2 23:23
我只係有d怕成品運輸途中撞到變形
有無人買過成品機呢?
作者: uon777 時間: 2017-10-4 08:23
岩岩砌左部i3 mk2s, 搞左我成兩日兩夜, tune 機 tune 左成日, 最煩就係z axis
作者: 綠袖子 時間: 2017-10-4 16:13
回覆 28# uon777
佢唔係可以自己調平？
作者: Offer 時間: 2017-10-4 16:48
岩岩砌左部i3 mk2s, 搞左我成兩日兩夜, tune 機 tune 左成日, 最煩就係z axis
uon777 發表於 2017-10-4 08:23
Any photo?
作者: alancck 時間: 2017-10-4 17:30
岩岩砌左部i3 mk2s, 搞左我成兩日兩夜, tune 機 tune 左成日, 最煩就係z axis
uon777 發表於 2017/10/4 08:23
作者: uon777 時間: 2017-10-7 00:34
回覆 31# alancck
just the normal one, havent bought the muti-material upgrade yet
作者: uon777 時間: 2017-10-7 00:44
回覆 30# Offer
圖片附件: 3d printer.jpg (2017-10-7 00:44, 137.86 KB) / 下載次數 50https://www.hkepc.com/forum/attachment.php?aid=2016062&k=aff53d88cc96346feda3c63757c53e2e&t=1781379842&sid=2sWkq1rJOZ
作者: uon777 時間: 2017-10-7 00:46
回覆 29# 綠袖子
u needa tune the live z axis anyways
圖片附件: final.jpg (2017-10-7 00:46, 136.85 KB) / 下載次數 73https://www.hkepc.com/forum/attachment.php?aid=2016063&k=e43f4861cdcd7957c3c1309a75cb730e&t=1781379842&sid=2sWkq1rJOZ
作者: dtom 時間: 2017-10-9 17:42
MK3
https://youtu.be/GwjXboWifzc?t=13m17s
作者: alancck 時間: 2017-10-9 18:35
MK3
dtom 發表於 2017/10/9 17:42
但如果佢會出料，又冇抹咀，咁未會有 over extraction 囉
作者: ustkl 時間: 2017-10-10 00:53
回覆 36# alancck
部機停左再續印一定會有痕跡, 如果响infill/support 時停機還可以, 打外皮就麻煩了。對打印質素有強迫症的會不能接受。
以我自己經驗為例, 打印失敗最多的原因是件野响平台印印下甩左引致炒米粉。如果可以做到部機知道自已就炒米粉及時停機。呢個功能可能更實用。
作者: Offer 時間: 2017-10-10 07:13
回覆 alancck
部機停左再續印一定會有痕跡, 如果响infill/support 時停機還可以, 打外皮就麻煩了。對打 ...
ustkl 發表於 2017-10-10 00:53
放心,有熱床的打PLA都几難甩件炒粉
作者: ustkl 時間: 2017-10-10 09:36
本帖最後由 ustkl 於 2017-10-10 09:51 編輯
放心,有熱床的打PLA都几難甩件炒粉
Offer 發表於 2017-10-10 07:13
甩件多不是機器問題，就算有冇熱床關係不大。通常都是用家設定問題。底部太小，又冇用birm or raft. 又或者support set 唔夠等。
via HKEPC Ionic Reader v1.7.0 - Android
作者: alancck 時間: 2017-10-10 09:56
甩件多不是機器問題，就算有冇熱床關係不大。通常都是用家設定問題。底部太小，又冇用birm or raft ...
ustkl 發表於 2017/10/10 09:36