Board logo

標題: Very simple test of CU program Y450a [打印本頁]

作者: ccw    時間: 2009-9-12 15:11     標題: Very simple test of CU program Y450a

Too lazy to make a long review..........just a very simple one.
Config:
CPU : T6500, 2.1 GHz, 2MB L2 Cache
VGA : Nvidia G130M, 512MB
Chipset : PM45
Ram : 1x2GB DDR3 1066
320GB harddisk (WD)

System is a clean installation of Win7 x64 RTM.
Almost all functions can be restored except bluetooth and Energy management(can be replaced with Windows's one).
Here are some tests:



All default in 3D setting, run in native resoltuion of Y450a(1368x768)




Remarks : The harddisk is quite hot.........during the full scan for bad sectors it reached 53C....
Don't install Diskeeper 2009 Pro Prem......this results in a failure to boot Windows(Win 7 X64).
After changing to the latest Nvidia driver, there is a great increase in System mark from 5.6 to 6.5.....so you are suggested to update this.

[ 本帖最後由 ccw 於 2009-9-12 15:16 編輯 ]
作者: rion    時間: 2009-9-12 15:39

原帖由 ccw 於 2009-9-12 15:11 發表
there is a great increase in System mark from 5.6 to 6.5.....


  咁高分
作者: ccw    時間: 2009-9-12 15:41     標題: 回覆 2# 的帖子

yes.....quite horrible....
The figure may not be the exact value while it must be 5.x to 6.5....for the Gaming graphics one...

[ 本帖最後由 ccw 於 2009-9-12 15:42 編輯 ]





歡迎光臨 電腦領域 HKEPC Hardware (https://www.hkepc.com/forum/) Powered by Discuz! 7.2