作者: loyukfai 時間: 2024-1-1 02:00 標題: ThinkPad X13 G4 AMD <$7000
見到 Carousell 有啲 X13 G4 AMD 7540U 32GB 1TB 賣緊 <$7000
主要 office + 少少 DaVinci Resolve
大家點睇？
作者: ToNg. 時間: 2024-1-1 08:46
凸舊野
作者: Miipp 時間: 2024-1-1 16:05
點睇: X13 雞肋，永遠唔睇
要 AMD 就 T14s，否則 x1c
作者: KinChungE 時間: 2024-1-1 16:39
如果真係會剪片, 唔好慳果少少, 上翻Ryzen 7
作者: MW2003 時間: 2024-1-1 20:52
回覆 4# KinChungE
CHing,
If for 剪片, how many RAM needed?
I am using Lenovo R9000P R9 7945HX, 16GB RAM, w/ 3 monitors, when 剪片, sometime, the screens will be black in a second!
Thx.
作者: 波風水門 時間: 2024-1-1 21:40
提示: 作者被禁止或刪除 內容自動屏蔽
作者: loyukfai 時間: 2024-1-1 23:07
如果真係會剪片, 唔好慳果少少, 上翻Ryzen 7
KinChungE 發表於 2024-1-1 16:39
如果佢有 7840U 加多一千幾百我都 ok
不過冇 😅
i mean carousell 上面
作者: KinChungE 時間: 2024-1-2 19:01
回覆 KinChungE
CHing,
If for 剪片, how many RAM needed?
I am using Lenovo R9000P R9 7945HX, 1 ...
MW2003 發表於 2024-1-1 20:52
好視乎你用乜software, 落幾多effect, 同時會放幾多條片p in p
黑一黑mon通常唔關ram事, 線shielding唔好既多
作者: MW2003 時間: 2024-1-2 20:08
回覆 8# KinChungE
Thx CHing reply.
In my case, I also use DaVinci Resolve (the free software).
In my case, I am using R9000P, it come w/ Lenovo Vantage, when I am doing some editing / export the clips, the VRAM bar will go up (I think refer to it use up the VRAM), the "black screen" will come out! And it is quite consistent! (i.e. normally, it won't come until I do the video editing).
So, I guess the VRAM might not enough, I am not too sure if I add extra RAM (currently 8GB x2) will help (e.g. change to 16 GB x 2 = 32GB)
Thx.
[attach]2405207[/attach]
作者: KinChungE 時間: 2024-1-3 09:29
回覆 KinChungE
Thx CHing reply.
In my case, I also use DaVinci Resolve (the free software).
In ...
MW2003 發表於 2024-1-2 20:08
你試左換線先, 唔得再諗
高loading下有時係會output signal多左noise搞到唔穩定都唔出奇
加RAM未必解決到問題
作者: MW2003 時間: 2024-1-3 11:14
回覆 10# KinChungE
Thx CHing,
Will follow and see if new cable can help!
Thx.
作者: MW2003 時間: 2024-1-5 21:40
本帖最後由 MW2003 於 2024-1-5 22:09 編輯
回覆 10# KinChungE
CHing,
I have change my home docking to another same docking (that docing including the built-in Type-C / Thunderbolt cable)
Dell docking: Docking WD19TB
It is still the same, the monitors will turn on & off during rendering (of DaVinci Resolve).
I have reduce the 3 monitors to only 1 mon, still the same! The ext monitor will on and off during rendering!
It will resume back to normal after the rendering complete!
Any suggestion? Thx.
作者: KinChungE 時間: 2024-1-6 02:41
回覆 KinChungE
CHing,
I have change my home docking to another same docking (that docing includ ...
MW2003 發表於 2024-1-5 21:40
冇計, 換dock
我公司一堆Thinkpad USB-C Dock Gen 2都某D情況下有機會閃mon / 花畫面
換左新版Thinkpad Universal USB-C Dock就解決
作者: MW2003 時間: 2024-1-6 16:08
回覆 13# KinChungE
Thx CHing,
Will see see other alternative can slove the issue!
Thx again for your sharing! :)
MW