作者: staymen 時間: 2021-11-7 09:14 標題: clonezilla clone dynamic disk
I use disk to disk clone old 8T to new 8T different model. (use dynamic disk in window )
follow this instruction:
https://www.ubackup.com/articles ... -to-clone-4348.html
After that it show two partitions in the new 8T disk,
P1: 16MB,
p2: raw.
original disk
p1: 16MB
p3: data
到底有咩事做錯左?
作者: carl.20150508 時間: 2021-11-7 12:14
有無睇過新8T個SIZE係唔係細過舊個隻?差少少都唔得。
ＣＬＯＮＥＺＩＬＬＡ可以ｒｅｓｉｚｅ．
作者: staymen 時間: 2021-11-7 21:23
回覆 2# carl.20150508
[attach]2291761[/attach]
咁睇係一樣.
作者: carl.20150508 時間: 2021-11-7 21:40
回覆 carl.20150508
咁睇係一樣.
staymen 發表於 2021-11-7 21:23
有無試過縮小destination個partition?
作者: staymen 時間: 2021-11-8 08:07
回覆 4# carl.20150508
無，因為clone一次7hrs.
其實我係唔係要選sector by sector.
dynamic disk 係唔係有咩特別？
作者: carl.20150508 時間: 2021-11-8 10:26
回覆 carl.20150508
無，因為clone一次7hrs.
其實我係唔係要選sector by sector.
dynamic disk 係唔係 ...
staymen 發表於 2021-11-8 08:07
dynamic disk係有D麻煩, clonezilla都無講明support..
作者: KinChungE 時間: 2021-11-8 10:35
回覆 carl.20150508
無，因為clone一次7hrs.
其實我係唔係要選sector by sector.
dynamic disk 係唔係 ...
staymen 發表於 2021-11-8 08:07
dynamic disk似Linux既LVM, 隔多左層
連#1都叫人用AOMEI Backupper Standard
作者: staymen 時間: 2021-11-9 09:15
回覆 7# KinChungE
oh,
changed from dynamic disk to basic disk and clone again.
Conclude result tonight.
作者: staymen 時間: 2021-11-9 21:31
用software轉左basic disk,用clonezilla 就OK了.
一般PC都係唔好用dynamic disk........