NAS <-> cat5e 1000M <-> PC Transfer 問題?

提示: 作者被禁止或刪除 內容自動屏蔽

換隻快D既NAS...

TOP

原帖由 l0001 於 2009-9-9 23:48 發表
唔知..有冇辦法可以增加個transfer rate??我得個十幾MB/s.......就算9k jumbo frame都係多1-2MB/s...好灰..個NAS都有500Mhz 既CPU

Thank


my ds106 (quite old, 266Mhz cpu) also have ~30MB/s if disable the anti-virus.

TOP

do you have router between the NAS and PC?
change to cat.6 cable

TOP

其實如果 NAS 同 PC 都行緊 Raid 5 係唔係點搞 (換晒 cat6 + JF 9K) 都唔會快得幾多

TOP

原帖由 l0001 於 2009-9-9 23:48 發表
唔知..有冇辦法可以增加個transfer rate??我得個十幾MB/s.......就算9k jumbo frame都係多1-2MB/s...好灰..個NAS都有500Mhz 既CPU

Thank


I suggest you try to directly plug your lan cable (cat 5e or 6) from your pc to nas and then test the transfer rate again. then you should know it's the problem on your nas or other network equipment like router or switch.

TOP

唔好咁迷信啦, 一般住家條lan線最多咪幾米起廿米止, cat5 同 cat6 會有乜差別.

TOP

NAS 個 LAN 係 100M 定 1000M ???
如果100M就好正常喎(100Mb/s => 12.5MB/s)

TOP