TP-Link 941ND 可否設定作為AP

之前已用開Linksys的router 當作AP咁用, 但問題如果日以繼夜唔熄機就會用用下hang, 好煩.

一心諗住是旦整隻router 都可以故技重施, 但買左TP-Link 941ND就唔識set, 因為插左入去 "Lan port 1,2,3,4"果到就只可以setup, 但硬是話拎不到IP.......一插番去WAN就直頭入唔到admin page.

以前Linksys, Asus 果d都係咁set, 唔通佢真係唔可以做AP?

用DD-wrt可以.

TOP

用DD-wrt可以.
chariot 發表於 2010-9-21 21:39


即係用原裝設定就唔可以????

TOP

唔清楚你想點
wireless router如果做唔到access point咁佢個wireless有咩用?
你話插LAN port攞唔到IP? 隻router係二手嗎?
我個941ND新買返黎LAN port pre-set左DHCP自動派IP
WAN攞唔到IP好正常
Lan port 1,2,3,4"果到就只可以setup
紅色呢句話可以setup係指入到admin page? 但攞唔到IP入唔到admin page wor...

TOP

該地方已有牆身PORT位, 所以如果CABLE由這處插入 ROUTER既WAN位會SET不到上網, 無論用DHCP, FIXED IP都係唔WORK, 之前用LINKSYS WRT54可以插入去ROUTER既LAN PORT, 咁就可以透過ROUTER 散WIFI訊號出去, 由原本既網絡GATEWAY派IP.

但宜家TPLINK 941ND 好似用唔到呢招.

TOP

you have to set the LAN IP of your 941ND to somewhere outside the DCHP server and router IP
For example if you are using a Router A with 192.168.0.1 (DCHP list 192.168.0.50-99)
you can set the LAN IP of 941ND to 192.168.0.100 and under the same subnet of Router A
And you have to disable the DCHP server of 941ND

TOP