救命!!!WR841ND V5 DD-WRT BrainSlayer-V24-preSP2 用I-CABLE點SET??

揀左WAN係DHCP
MAC Clone左
就係唔派IP俾我
I-CABLE 10M DHCP

THX

orginal use without router?  
reconnect to original, cmd - ipconfig /release
then connect to router with mac cloned.  renew to see.

TOP

e+唔經router係上到網
一經router就上唔到
我入番192.161.1.1睇
WAN IP係0.0.0.0.......
到底要點SET????
THX

TOP

一係有冇還原 TP-INK 原裝 Firmware方法???
當我投降.....
THX

TOP

唔經router係上到網, means i-cable no problem.
assume you are using windows.
Start - run - cmd, then dos window popup
type - ipconfig  /all
u can see the lan card mac address, ip, dns, gateway .... information for i-cable.
type - ipconfig  /release
then take out the lan cable
plug the lan cable from computer to router
set the router to DHCP, mac clone to your computer mac.
save setting and reboot the router to see what happen

TOP

唔經router係上到網, means i-cable no problem.
assume you are using windows.
Start - run - cmd, then  ...
ericchak 發表於 2010-9-25 14:05



    得左了
多謝師兄

TOP

welcome, the most important for i-cable is release the dhcp otherwise it will hold that.  (same process as you shunt down ur computer to release everything) it was my experiance for i-cable 10 years ago but seems still work today.
DD-wrt should have problem for HGC dhcp (i don't remember which version of dd-wrt) and should use static IP instead of DHCP setting, you need to mark down all setting of original - ip, subnet, gateway, dns and then clone to static ip setting and it work too.

TOP

welcome, the most important for i-cable is release the dhcp otherwise it will hold that.  (same proc ...
ericchak 發表於 2010-9-25 14:15



    多謝師兄指導
小弟受益良多

TOP