隻 tp-link1043 router 刷死左

本來想更新dd-wrt firmware,點知.....依家打http://192.168.1.1/都認唔到,大家認為有冇得救?

你係原廠轉DDWRT定係DDWRT升級?
用factory-to-ddwrt.bin定tl-wr1043nd-webflash.bin刷?

TOP

回復 2# 122003
DDWRT升級

TOP

先抆電再試,  再唔得 30/30/30

TOP

本帖最後由 122003 於 2011-4-20 22:40 編輯
回復  122003
DDWRT升級
廿三太郎 發表於 2011-4-20 22:07

試下咁

save做.bat檔,放係tl-wr1043nd-webflash.bin同一個資料夾
然後啟用tftp功能
改電腦ip做192.168.1.2, set Mask set Gateway
斷router電,行bat檔求其按個制等佢開始try
之後插返router電,等佢flash
  1. @echo off
  2. echo ===========================================================================
  3. echo This batch file will upload tl-wr1043nd-webflash.bin in the current directory to
  4. echo 192.168.1.1 during the router's bootup.
  5. echo.
  6. echo * Set your ethernet card's settings to:
  7. echo      IP:      192.168.1.2
  8. echo      Mask:    255.255.255.0
  9. echo      Gateway: 192.168.1.1.
  10. echo * Unplug the router's power cable.
  11. echo.

  12. echo Press Ctrl+C to abort or any other key to continue...
  13. pause > nul

  14. echo.
  15. echo * Re-plug the router's power cable.
  16. echo.
  17. echo ===============================================================================
  18. echo Waiting for the router... Press Ctrl+C to abort.
  19. echo.

  20. set FIND=%WINDIR%\command\find.exe
  21. if exist %FIND% goto PING
  22. set FIND=%WINDIR%\system32\find.exe
  23. if exist %FIND% goto PING
  24. set FIND=find

  25. :PING
  26. ping -n 1 -w 50 192.168.1.1 | %FIND% "TTL="
  27. if errorlevel 1 goto PING

  28. echo tftp -i 192.168.1.1 put tl-wr1043nd-webflash.bin
  29. tftp -i 192.168.1.1 put tl-wr1043nd-webflash.bin
  30. if errorlevel 1 goto PING

  31. set FIND=

  32. echo.
  33. echo ===============================================================================
  34. echo * WAIT for about 2 minutes while the firmware is being flashed.
  35. echo * Reset your ethernet card's settings back to DHCP.
  36. echo * The default router address will be at 192.168.1.1.
  37. echo.

  38. pause
複製代碼
唔包得
未試過玩死隻1043,另一隻flash瓜過幾次都係咁搞

今日由dd-wrt flash返去原廠,頂佢個wireless唔順

TOP

如果唔係用原廠FW 用唔到PCCW 200M
我都唔會FLASH 去DDWRT
因為個WIRELESS 真係只去到130M...

但唔用DDWRT 又冇法子上網....PCCW 個IP RANGE 同GATEWAY RANGE 唔係同一GROUP 內.....

TOP