Question of Jumbo Frame

If i want to setup a jumbo frame network, my current network at home is as below:

Modem > Router(100Mbps) > Switch (10/100/1000Mbps) > PC/PC/PC/PC

I want to know if the Router need to support Jumbo Frame too?

Some of the PC is IP fixed and some is DHCP

本帖最後由 tgo 於 2012-6-21 23:28 編輯

My previous experience, same setup as yours,  the router is a old Zyxel 336M that does not support Jumbo Frame. All computers can access the internet without problem. The only problem is you can't not access the router's configure page. You have to disable your computer's jumbo frame or set it to 1500bytes before you access the router.

If i want to setup a jumbo frame network, my current network at home is as below:

Modem > Router(10 ...
kennfrds 發表於 2012-6-21 21:55

TOP

If i want to setup a jumbo frame network, my current network at home is as below:

Modem > Router(10 ...
kennfrds 發表於 2012-6-21 21:55


ROUTER可以不用支援

TOP

My previous experience, same setup as yours,  the router is a old Zyxel 336M that does not support J ...
tgo 發表於 2012-6-21 23:24


Thx Ching

TOP

回復 3# sonichkhk


    Thx Ching

TOP