MikroTik RouterOS 5.18 Release ~ 06/24/2012

What's new in 5.18 (2012-Jun-21 17:20):

*) fixed upgrade problem when it failed with error "disk is too small" while
   there was plenty of space left;
*) fix health and poe access reliability on OmniTIK UPA and RB750UP boards;
*) sstp - improve initial handshake to better handle many new connections;
*) wireless - do not use bridge and WDS mode on AP-AP links, causes loops;
*) dhcp ipv6 pd client - fixed ipv6 pool creation after reboot;
*) dhcp ipv6 pd client - added option add-default-route;
*) sstp - fixed connection idle time reporting;
*) fix bad block count not to increase on Samsung K9F1208U0C nand;
*) snmp - fix dhcp lease table, snmp reported an incorrect information
    when a static lease had configured different address than current active address,
    this should also solve problem with dude polling same leases over and over again;
*) fix RB1100 crash on interface disable/l2mtu change/reboot;
*) dns could not resolve some domain names, was ignoring replies with DNAME RRs;
*) fix firewall log action - sometimes was not logging mac addr;


What's new in 5.17 (2012-May-28 12:34):

*) files - fixed problem when directories disappeared after reboot on usb or sd flash;
*) webfig - make QuickSet scan list work in Firefox v12;
*) webfig - fixed problem in QuickSet when changing country or channel-width in AP
   mode would enable NV2 protocol;
*) webfig - fixed skins when hiding first tab may make other tabs inaccessible;
*) winbox - fixed packet raw data view in packet sniffer;
*) winbox - fixed problem when router could be DoS attacked through winbox port;
*) ports - add option "/port firmware ignore-directip-modem"
    which will ignore modems ip interface and modem's serial ports will be made accessible to users;
*) ipv6 pool - allow pools with prefix equal to prefix length;
*) ping times improved on Nv2 high data rate wireless links;
*) tool email - added starttls option;
*) snmp - allow multiple ip ranges for each community;
*) serial console - added channel support;


What's new in 5.16 (2012-May-09 17:23):

*) webfig - fixed problem when new item addition to status page in design skin mode
   did not work;
*) add pw-type option for BGP VPLS;
*) fixed mac telnet - sometimes did not work if more than one mac level path
    to destination;
*) user - fixed problem when adding new users from console it's password was not set;
*) reset packet mark when encapsulating/decapsulating from eoip,ipip,gre,eoipv6,ipipv6,gre6 tunnels


What's new in 5.15 (2012-Apr-20 13:11):

*) ssh - added option "/ip ssh always-allow-password-login" which will allow
    password based login for users using public key;
*) snmp - moved disk oids shown in console from "/system resoure" to "/store disk";
*) certificate manager - added PKCS#8 support for key import;
*) lte - support for modems which utilize sierra_net driver with product ID 0x68a3,
    serial interface is no longer accesable for those modems;
*) quickset - added AP mode;
*) smb - fixed authorization problems, shares should now be browsable;
*) dhcp client - revert NTP settings on dhcp client disable;
*) dhcp server - use DNS server from DHCP client (broken in v5.13);
*) sstp - made it working on Pentium 4 again;
*) added support for usb forwarding over tcp;
*) webfig - fixed uptime column in hotspot active users list (and other places as well) ;
*) webfig - hide design skin button if user does not have
   sensitive & policy permissions;
*) webfig - do not allow to upload/download files
   without write/read & ftp permisions;
*) webfig - fixed blank page when logout, undo, redo, hide-menu or safe-mode were hidden in skin,
*) winbox - show connection tracking max entries properly;
*) winbox - make interface name sorting more stable;
*) winbox - do not reset user password when changing it's properties;
*) rb1200 ether6,ether7,ether8 did not support big packets when linked at 10/100Mbps;



Download:
http://www.mikrotik.com/download.html

多謝通知!!

TOP