LEDE 終於用到Fast Patch NAT( ar71xx only)

本帖最後由 321 於 2017-7-5 00:33 編輯

暫時只係mips74k-ar71xx的router先用到,但試過真係可以行到900mbps up
https://github.com/gwlim/mips74k-ar71xx-lede-patch

Ching 你用邊部router 試?


暫時只係mips74k-ar71xx的router先用到,但試過真係可以行到900mbps up
321 發表於 2017-6-29 23:24

TOP

Ching 你用邊部router 試?
劍神王 發表於 2017-6-29 23:39


TPLINK WDR3600
遲D試埋1043ND V2同Archer C7

TOP

想看更多的討論,可以去LEDE forum
https://forum.lede-project.org/t/hardware-nat-for-lede/1094

TOP

I was using OpenWRT on 1043ND v1.x and WDR3600 at home.
Will test LEDE on 1043ND v1.x since it is idle now.

TOP

I was using OpenWRT on 1043ND v1.x and WDR3600 at home.
Will test LEDE on 1043ND v1.x since it is id ...
volospin 發表於 2017-6-30 08:02

1043N v1上到700mbps Nat, c7可以上到940mbps,非常犀利

via HKEPC Reader for Android

TOP

I am considering buying C1200 or C7 v2.
heard it is the same chipset.

TOP

wait, I installed LEDE on my 1043ND v1.
LEDE Reboot 17.01.2 r3435-65eec8bd5f / LuCI lede-17.01 branch (git-17.152.82987-7f6fc16)

But... I install ar71xx version... and how do I patch to enable high speed NAT?

TOP

wait, I installed LEDE on my 1043ND v1.
LEDE Reboot 17.01.2 r3435-65eec8bd5f / LuCI lede-17.01 branc ...
volospin 發表於 2017-7-4 21:58



    need to re-compile whole firmware -> upgrade

TOP

I am considering buying C1200 or C7 v2.
heard it is the same chipset.
volospin 發表於 2017-7-4 19:59



    C7 v2 la, at least it's directly supported. Although hardware is same, GPIO/flash layout could be different

TOP