快幫手
Tom_jerry 發表於 2021-9-1 14:39



    呢個我都唔識,冇玩開 PON.....

TOP

本帖最後由 Tom_jerry 於 2021-9-1 15:12 編輯
有可能係因為你個port係sfp+, 之前南天QQ group都有人試過, C兄你試試鎖定port speed係1000M/100M, 唔得 ...
雯雯 發表於 2021-9-1 14:50


好今晚試試THX

你好叻 堅堅地喎

SFP+ interface compatibility settings with SFP optical transceivers

For MikroTik devices with SFP+ interface that support both 10G and 1G link rate following settings must be set on both linked devices for required interfaces. These settings only relate when optical SFP transceivers are used. In order to get them working in 1G link rate, use the following configuration:

/interface ethernet set sfp-sfpplus1 auto-negotiation=no speed=1Gbps full-duplex=yes

    auto-negotiation disabled
    port speed 1G
    Full-Duplex

Devices which SFP+ ports support 1G links:

    CCR2004-1G-12S+2XS - All SFP+ interfaces can be used in 1G mode if required.
    CCR2004-16G-2S+ - All SFP+ interfaces can be used in 1G mode if required.
    CCR1072-1G-8S+ - All SFP+ interfaces can be used in 1G mode if required.
    CCR1036-8G-2S+ - All SFP+ interfaces can be used in 1G mode if required.
    CCR1009-8G-1S-1S+ - All SFP+ interfaces can be used in 1G mode if required.
    CCR1009-7G-1C-1S+ - All SFP+ interfaces can be used in 1G mode if required.
    CSS326-24G-2S+RM - All SFP+ interfaces can be used in 1G mode if required.
    CRS3xx series switches - All SFP+ interfaces can be used in 1G mode if required.
    RB5009 series - SFP+1 interface can be used in 1G mode if required.
    RB4011 series - SFP+1 interface can be used in 1G mode if required.
    CRS226-24G-2S+ - Only SFP+1 supports 1G link speed, SFP+2 is for 10G links only.
    CRS210-8G-2S+ - Only SFP+1 supports 1G link speed, SFP+2 is for 10G links only.
    CSS610 series switches - All SFP+ interfaces can be used in 1G mode if required.

Devices which SFP+ interfaces can be used only for 10G links:

    CCR1016-12S-1S+
    CRS212-1G-10S-1S+

TOP

本帖最後由 postmaster 於 2021-9-1 17:44 編輯

https://www.hkepc.com/forum/view ... &extra=page%3D1
可能係老電新戰略部署, 有 1G link 都冇用  

你有冇feel吓支棒棒燙手嗎?

TOP

可能係老電新戰略部署, 有 1G link 都冇用  

你有冇feel吓支棒棒燙手嗎? ...
postmaster 發表於 2021-9-1 17:42

堅熱

TOP

原來TB的都是香港入口..

TOP

本帖最後由 postmaster 於 2021-9-2 18:44 編輯

開咗張ticket畀support...第ㄧ次用佢哋個技術支援服務, 睇吓好唔好。 暫時level 1都係hea住我先.

最終可能要換貨

TOP

開咗張ticket畀support...第ㄧ次用佢哋個技術支援服務, 睇吓好唔好。 暫時level 1都係hea住我先.

最終 ...
postmaster 發表於 2021-9-2 18:20

衰乜

TOP

本帖最後由 Tom_jerry 於 2021-9-3 07:19 編輯

碌大陸 pon stick 伏已中鳥




已可登入碌 pon stick 嘅 web 同 telnet  

但 loid 設定, loid 密碼,ploam 密碼不允許留空

大佬丫,3樣都係吉架

叫吱典填

個SN得12個位,吱16個位



附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

TOP

回覆 58# Tom_jerry


    12個位,華為填HWTC+(SN尾8個數)

TOP

回覆  Tom_jerry


    12個位,華為填HWTC+(SN尾8個數)
肉類 發表於 2021-9-2 20:47

really thx

TOP