塊 AKGX-M 版怪怪地

行 4x DIMM ( 2GB x2 + 1GBx2 )
會變左  Single Channel , 無論我點 排個兩對 RAM 都係 Single Channel
一拆走是但一對 就行到 Dual Channel

同埋 同樣 HTT 頻 setting , 行四條 RAM 會變左 DDR2-800 左右 唔肯上 ( HTT 228 x 12 ,  12.5 , 13 都試過)
同埋變 Single Channe

有無版友有類似情況呢
BIOS Version : M03

提示: 作者被禁止或刪除 內容自動屏蔽

TOP

說明書咁寫, 可能 4 條 RAM 都要相同容量先可以 dual channel

Dual channel Limited!
1. Dual channel function only supports when 2 DIMM Modules plug in either both DIMM1 &
DIMM2or DIMM3 &DIMM4, or four DIMM Modules plug in DIMM1~DIMM4.
2. DIMM1 & DIMM2, or DIMM3& DIMM4 must be the same type, same size, same frequency
for dual channel function.

TOP

原帖由 Phil_123 於 30-3-2009 09:27 AM 發表
說明書咁寫, 可能 4 條 RAM 都要相同容量先可以 dual channel

Dual channel Limited!
1. Dual channel function only supports when 2 DIMM Modules plug in either both DIMM1 &
DIMM2or DIMM3 &DIMM4, or four DI ...


又會咁都有
790FX 反而無咁既問題

TOP

我都系用呢塊板,用2Gx2+1Gx2.行到dual channel.
我系頭兩條槽插2Gx2,後兩條槽插1Gx2. 不過全部ram都系adata

TOP