Hardware Raid 撞 ACHI? 救命

買左2個2.5" Mtron SSD返黎
放左入個2x2.5" -> 1x3.5" RAID盒度行RAID0裝Vista
因為係Hardware Raid~
應該係唔洗裝任何raid driver同埋bios IDE/ACHI/RAID個度唔洗揀RAID
諗住行ACHI
點知行ACHI裝Vista"複製檔案"後run "展開檔案"會失敗..
類似話寫唔到file
如果揀RAID
佢就以為我係行software raid要裝driver... (咁其實我都估揀RAID係唔啱)
結果要行返IDE先裝到....
有無辦法行返ACHI
定係Hardware RAID0 係唔可以行 ACHI= ="
另外唔知點解用IDE裝完睇返bios
隻HDD行緊DMA5...
mtron隻HDD應該行唔記得DMA6定7先啱... 但又無得改
諗住攪RAID0
點知家下隨時仲慢過我當初就咁一隻mtron行ACHI+DMA6/7
大家有無咩教到我...
thanks!

回覆 1# 的帖子

AHCI installation 要 F6 disk.

TOP

回覆 2# 的帖子

Vista都仲要安driver ga行ACHI?
Where to get the F6 disk?
The ASUS motherboard disc only has the Intel RAID Driver and JMicron RAID Driver. I think both are not useful~

TOP

Intel offical 32-bit F6 driver
Please extract and put the drivers in a USB drive and you can add the drivers later.

TOP

同埋其實vista行achi本身唔係自己識裝ga咩..
我記得xp就要用F6
唉 似乎衣個問題真係無咩人識

TOP

intel release document 有指明 32-bit F6 disk 包含以下 driver.
intel ICH10R SATA AHCI controller
intel ICH10D/DO SATA AHCI controller

TOP

但照計F6 disc安intel ICH10R SATA AHCI controller係XP時代既方法
Vista隻碟已經內置ACHI driver自動install

TOP

你o個個係咩 RAID 盒 ? 係咪跟埋張 card 的 ?

TOP