gigabyte x58a ud7 can't detect 12G ram

我用CORSAIR 1866 6G KIT RAM X 2 (16G total)
當RAM SET 做XMP OR MORE THAN 1800, 只 detect 到 8G,

有冇其他 User 都有我這個問題

我用CORSAIR 1866 6G KIT RAM X 2 (16G total)
當RAM SET 做XMP OR MORE THAN 1800, 只 detect 到 8G,

有 ...
kwm488 發表於 2010-8-4 20:59

查下塊板食唔食到 12GB 以上?

TOP

回復 1# kwm488

Can the board detect 12G of ram with running at defult speed?
The reason the board only detect 8G is becasue maybe that is the max amount of ram it can hold at that speed or voltage... You can try adding voltage to see if it works..

TOP

check check MB manual同chipset spec.
有時未必support
同埋要行default speed計
超左認唔到關人鬼事

TOP

我用CORSAIR 1866 6G KIT RAM X 2 (16G total)
當RAM SET 做XMP OR MORE THAN 1800, 只 detect 到 8G,

有 ...
kwm488 發表於 2010-8-4 20:59


6G x 2又點會total 16G.......

X58A板一定suport 12GB,就算24GB照計都唔成問題.

要玩插爆,難度係在乎粒U o既IMC,以及BIOS入面有關RAM o既timing.GB板我唔熟,幫你唔到.....

同埋不妨去超頻板問o下~

TOP

the board can detect 12G if run default speed. sorry i have 12G ram total, not 16G

i call alteah and email consair. they reply me i should buy 12G kit, because the ram run too fast, CPU or motherboard maynot support. this is a reason they offer 12G kit.

i will use memtest, if my board run 1800hzm is ok, that fine for me

thank everybody

TOP

回復 6# kwm488
其實你超高過1800
有冇+電?

TOP

我加電到 1.64V

gigabyte reply me
triple channel just support max 1600Hmz.
所以我SET 起過1800HMZ , motherboard can't detect 是正常。

現在我都唔知點算

TOP