一部機format 左個c: 就裝唔返

一部機format 左個c: 就裝唔返,  呢部機我叫佢A機
咁我就拎左呢個harddisk去另一本身冇問題機插, 呢部我叫佢B機
B機開左機後, 就入唔到windows, 點解會咁架呢, 抆返A機既HARDDISK出黎又冇事
sata 既harddisk 係咪唔使好似以前咁set master/ slave 架?
佢會唔會覺得我新插入去既harddisk 係MASTER???

好煩惱
幫幫手, 我依家想拎返A機HARDDISK D野, COPY落去B 機先
唔該

本帖最後由 hongkongiron 於 2010-8-6 17:16 編輯

Have you go into BIOS to see if this "A" HDD really installed without problem?

TOP

Have you go into BIOS to see if this "A" HDD really installed without problem?
hongkongiron 發表於 2010-8-6 17:13


可以點樣睇
入左bios 可以睇到嗎?
呢個step 係check到d咩?

TOP

本帖最後由 hongkongiron 於 2010-8-6 17:26 編輯

IF BIOS cannot read it, it's seen HDD/cable problem.

Where just power-up, press "DEL" key, and find HDD setting. You should able to see new hdd details.

TOP

IF BIOS cannot read it, it's seen HDD/cable problem.

Where just power-up, press "DEL" key, and find ...
hongkongiron 發表於 2010-8-6 17:25


即係如果入左bios 都睇唔到A機既hdd plug 左, 咁就有可能係線或者hdd 既problem
咁如果係hdd 既problem, 會唔會真係要出去d鋪頭先拎得返d資料?

TOP

Try try sin la, most case is cable problem.

But you mentioned: "一部機format 左個c: 就裝唔返".
You formatted the disk??? You want to do undelete?

TOP

Try try sin la, most case is cable problem.

But you mentioned: "一部機format 左個c: 就裝唔返".
You  ...
hongkongiron 發表於 2010-8-6 17:31


係呀, 我係想剷左部機佢
點知一剷就load唔返d野

TOP

A機個hdd 已經formatted  點拎返d data出嚟呀

插去B機度都係拎唔番

TOP

A機個hdd 已經formatted  點拎返d data出嚟呀

插去B機度都係拎唔番
nverql 發表於 2010-8-6 21:35


我唔記得講
我要既野o係d:
我只係format左個c:
唔好意思

TOP

插左A機個HDD落B機之後
有無入B機個BIOS睇睇個HDD Boot Priority 係咪A機HDD第一?
如果係ge話, set反B機HDD boot機

TOP