火牛個-12V同-5V只得-8.33V同-2.94V

我用幾個software睇都係咁低...請問係我火牛出左事,定係sensor壞左?

Two t
1. Some PSU (Power Supply) do not have -12V output anymore
  because the new MBs do not use it. You'd better yr PSU label
  first whether there is any -12V output.
2. There may be errors on the part of the sensor (on the M/B)
or the software does not support certain type of sersors.
  You'd better check the voltage readings in BIOS.
  Software readings are not reliable. Do not rely on them.

TOP

本帖最後由 McDullDull 於 2010-9-26 11:52 編輯
入BIOS睇下個voltage 係咪一樣
如果係火牛壞既機會好大
kgor 發表於 2010-9-26 00:16



    BIOS只睇到+12V同+5V,冇show-12V同-5V

不過其實如果-12V同-5V趺到咁低,係咪連機都開唔到呢?

其實-12V同-5V有咩用,見其他人來來去去都係講+12V同+5V

我冇個d它表呀...

TOP

Check 錯
BIOS check again

TOP

要用它表check先至正確,最好用它表check下..........

TOP

入BIOS睇下個voltage 係咪一樣
如果係火牛壞既機會好大

TOP