電腦問題..幫幫手

有3條RAM(大家都係3000 C15)..只可單插1條(插3條開機黑畫面 )
用緊I7-8700+ASUS B360G
係咪BIOS出左咩問題?RAM冇超過

1. 有RAM壞, 一條條試睇下有無問題
2. 底板RAM SLOT壞, 又係一條條slot試
3. 以上全部無換的話, 留意下3條係咪相同牌子, 唔同牌子可能D die唔同都會令部機唔stable

TOP

BIOS有冇試過更新~

TOP

本帖最後由 bigTAT 於 2019-2-27 22:48 編輯

一條條試過開到機.3條開唔到.....只可以用一條開到機
底板RAM SLOT壞?係=RAM槽?
2條係G-SKILL.1條DELTA
有人話唔同牌子都用到(3條都係C16)

TOP

BIOS我唔識更新..

TOP

How about only boot up with the 2 x G.Skill  ?????

If you are able to boot up with 2 pcs G Skill, this means the Delta is not compatible with the G.Skill !

TOP

G-SKILL 2條開唔到機只可以用1條...Delta RAM可以開到機
不兼容?唔關牌子問題?大家都係 3000HZ.C15
總體黎講係只可以1條黎開機.
2-3條以上係開唔到

TOP

1. Where you put the 2 G.Skill into the slot, put them on the same color slot?

2. You might need to check the pin grid (CPU) and take a look in details whether all the pin are in the right position, no pin was bending! Experienced some people install the CPU without attention of their finger and damaged the pin !

3. If all the above done and can't solve your problem, the IMC inside the CPU might be defected , I experienced twice that on Intel 4th generation CPU which only able to run with one sitck of ram...

TOP

1.G.Skill放入 1/3+2/4
2.CPU損壞針腳??如果損壞針腳咪開唔到機??(我E+仲開到機唔關事呀??)
3.CPU內部的IMC可能會出現故障??IMC係邊到+??

TOP

CPU內部的IMC可能會出現故障?我有咩方法令到電腦正常返?

TOP