Display Card 出唔到 3 個 mon

用緊 W4100，睇 spec 講可以 4 display output
我而家只係 4k x 1, 2K x 2
點整都只係出到頭 2 個 mon
對調 cable 又試過
3 個 mon 都係冇問題的
但係 Radeon 個 program detect 唔到第 3 個 mon
windows 就 detect 到不過顯示唔到

0

0

Bomber

進階會員

Rank: 3 Rank: 3 Rank: 3

2^#

發表於 2020-11-16 14:14 | 只看該作者

本帖最後由 Bomber 於 2020-11-16 14:15 編輯

你應該要買一個active adapter, 3個芒或以上要

Requirements for Setting up AMD Eyefinity

AMD compatible graphics card.
Compatible monitors
Video or Display Cables
DisplayPort cable (at least 1 monitor must be connected using DisplayPort).
The DisplayPort cable must be an Active Display Cable (as recommended by ATI) for using 3 monitors. Using any other type of display cable other than the ones listed below may result in being unable to use the third monitor.

TOP

Bomber

進階會員

Rank: 3 Rank: 3 Rank: 3

3^#

發表於 2020-11-16 14:28 | 只看該作者

比條link你參考下

https://www.amazon.com/Cable-Mat ... ology/dp/B00PJ3LSIG

TOP

KinChungE

長老會員

Rank: 5 Rank: 5 Rank: 5 Rank: 5 Rank: 5

4^#

發表於 2020-11-17 21:49 | 只看該作者

你應該要買一個active adapter, 3個芒或以上要

Requirements for Setting up AMD Eyefinity

AMD comp ...
Bomber 發表於 2020-11-16 14:14

如果全部mon都係DP Mon就唔使
有任何一個mon非DP都要用active adapter

TOP

alanhippo

進階會員

Rank: 3 Rank: 3 Rank: 3

5^#

發表於 2020-11-17 22:22 | 只看該作者

如果全部mon都係DP Mon就唔使
有任何一個mon非DP都要用active adapter
KinChungE 發表於 2020-11-17 21:49

咁煩我買過張 N 記 display card 會唔會仲好

TOP

KinChungE

長老會員

Rank: 5 Rank: 5 Rank: 5 Rank: 5 Rank: 5

6^#

發表於 2020-11-17 22:27 | 只看該作者

咁煩我買過張 N 記 display card 會唔會仲好
alanhippo 發表於 2020-11-17 22:22

唔關N/A事, 係你張W4100太舊先係咁
而家D新卡行3 mon基本上係任插

人地行5 mon都係咁:
https://www.reddit.com/r/Amd/com ... _4_outputs_at_once/
Rx 480 should work, long as it has the outputs you need.
I'm personally running a Nitro+ with 2 dp, 2 HDMI, and 1 DVI at the same time.

TOP

alanhippo