有無人係用E8400+原廠HeatSink ?

ZetaCE

我fullload 果時(行prime95) 去到成7x度, 我想問係個reading 有問題(因為我聽人講E8400的reading 好似有問題), 定真係太高
平時idle 時就41C...

係唔係要轉用其他較勁的heatsink呢 ? 但我見宜家果d HeatSink好似好大件好重咁, 我怕整到塊底板

P.S.我無超頻

Inspire

GELID 果個咪唔細囉，又細又輕

ZetaCE

原帖由 Inspire 於 2008-12-21 23:15 發表
GELID 果個咪唔細囉，又細又輕

我見好多人都推介 Xigmatek S1283, 佢重600g, 我想問其實算唔算重...大約幾多g 先會對底板造成負荷過重
唔好意思, d問題好似好入門 , 因為我係用直身機, 我好怕用d 好重的的heat sink而導致整壞MB ...
Thanks a lot

hanghanghang

如果你唔超頻
其實根本無需要換HS...

紅雲

而家lee個氣溫冇理由都會咁高溫度架wo...係唔係對流做得唔好同埋隻hs裝得唔好阿?

Wanderer

google it, known problem for the reading...
I saw some guy reads E84@48C the second he power on the system, while it's snowing in his area
he did not O/C though

[ 本帖最後由 Wanderer 於 2008-12-22 00:43 編輯 ]

ZetaCE

原帖由 wilsonkf 於 2008-12-22 00:05 發表
主要睇你有無上背板。無既話400g都有Ｄ危。

如果你唔想換HS，可以試下DIY下個HS底，磨平佢，用好D既導熱膏，同埋加大番個扣具既壓力。full load低十幾度都唔係無可能架。

我想問上背板的意思係唔係將底板上落Case到的果塊鐵板 ?

ZetaCE

原帖由 Wanderer 於 2008-12-22 00:41 發表
google it, known problem for the reading...
I saw some guy reads E84@48C the second he power on the system, while it's snowing in his area
he did not O/C though

我見google 都咁講, 但我又見好多人係lee 到就算超頻, full-loading, 都係5x度, 所以我有d confused....

我個Case 係CM690, 用了佢default 的三把風扇, 即係 1 front (抽入), 1 rear(抽出), and 1 side (抽出)... 對流應該算ok

珊珊堯堯

根本原裝既都唔會感熱