如何固定每個 drive 的 drive letter?

每次插入祼族都要去電腦管理度加入 drive letter 佢先有 letter 用,都幾煩,再加上個 card reader 度又有幾個 drive,原先固定左例如 L 係俾 CF 既,咁我就改埋個 drive name,出到例如: CF (L:),咁我就知邊個 slot 係咩 drive......

但一旦移除過個 reader ,就算無插過任何 drive ,都有可能移位.....

其實有無辦法固定某隻硬碟就用某個 drive letter?而且就算 Remove 左都唔會俾其他 drive 佔用?

唔該晒!!!

每次插入祼族都要去電腦管理度加入 drive letter 佢先有 letter 用,都幾煩,再加上個 card reader 度又有 ...
dls2046 發表於 2011-10-9 23:14


I designate Drive M and Drive N for the Raid Arrays; hence even I plug in other HDDs to the removable hard disk rack or connect a card reader to the system, the drive letter of my raid arrays would not change.

TOP

how to designate it and fix it? how to prevent the letter from being used by other removable devices?

TOP

本帖最後由 kenn 於 2011-10-11 14:57 編輯
how to designate it and fix it? how to prevent the letter from being used by other removable devices ...
dls2046 發表於 2011-10-10 20:56


"Start" ---> right click "computer" ---> "manage" ...> "disk management" ---> then you can change the drive letter of any drive (except drive C).

I intentionally to designate drive letter at a lower end (i.e. M, N....) such that when you plug in new device(s), they will be designated by Windows to "D", "E" (following "C").  For your information, I designate my DVD-ROM as "Y" and network printer as "Z".  These drive letters will never be changed.

TOP