D300 firmware 1.03 有 back focus 虫

影10張有7~8張主體back focus, 嚇死我以為幾枝鏡都要攞去CS cal.!:funk:

see similar case reported by other user:
http://forums.dpreview.com/forums/read.asp?forum=1039&message=29848698

FIRMWARE 1.10 fixed the bug.

http://nikonasia-en.custhelp.com ... li=&p_topview=1

What's New?
Modifications enabled with upgrade of A and B firmware from Ver. 1.03 to Ver. 1.10
  • The Highlights playback display option has been moved from Display mode>Basic photoinfo>Highlights in the playback menu to Display mode>Detailed photoinfo>Highlights.
  • The size and color of “Demo” displayed in the monitor with playback when No memory card? in the Custom Settings is set to Enable release, have been modified.
  • The range of settings available for ISO sensitivity settings>ISO sensitivity autocontrol>Minimum shutter speed in the shooting menu has been increased from 1/250–1 s to 1/4000–1 s.
  • When shooting in hand-held live view mode and the frame is magnified prior to autofocusing, operation has been modified so that display returns to the magnified display rather than full-frame display.
  • Images captured with Rotate tall, in the playback menu, set to On are not automatically rotated for display immediately after capture (image review).
  • A Copyright information item has been added to the setup menu. When Copyright information is enabled, the copyright symbol (©) is shown in the shooting info display.
  • Recent settings can now be displayed in place of My Menu.
  • Custom Setting e3 Flash cntrl for built-in flash (e3 Optional flash when an optional Speedlight is mounted on the camera) can now be added to My Menu using the Add items option in My Menu from Add items>Custom settingmenu>e Bracketing/flash.
  • The degree of the High ISO NR setting can now be confirmed in the shooting info display while the High ISO NR setting item, in the shooting menu, is being applied.
  • Ankara, Riyadh, Kuwait, and Manama have been added to the Time zone options for the World time item in the setup menu.
  • When a GPS device is used and no heading information is available, ---.--° is now displayed for the Position>Heading option in the GPS item in the setup menu.
  • When shooting in live view mode using Camera Control Pro 2 (Ver. 2.2.0 or later) with a PC-E lens, the aperture setting can now be adjusted from the computer.
  • Focus acquisition performance in dynamic-area AF mode has been improved.
  • Focus acquisition performance with contrast-detect AF has been improved.
  • Auto white balance performance has been improved.
  • The fourth digit in seconds display for GPS latitude and longitude information is now rounded off rather than omitted.
  • The current MB-D10 battery type setting can now be confirmed in the shooting info display when R6/AA-size batteries are used with the Multi-Power Battery Pack MB-D10.
  • An issue that caused an increase in noise with shooting in [M] exposure mode at a shutter speed setting of bulb with the shutter held open for less than 8 seconds and Long exp. NR enabled has been resolved.
  • An issue that prevented shutter release at the specified shutter speed when no operations were performed for 30 seconds in mirror up mode has been resolved.
  • An issue that caused abnormal image display when Image review was set to On and the playback zoom in button was pressed immediately after shooting at the following settings has been resolved.
    • Image quality: NEF (RAW ) + JPEG
    • NEF (RAW) recording: Lossless compressed or Compressed
    • Image size: S or M
  • When the Speedlight SB-800 was mounted on the camera with flash mode set to distance-priority manual (GN) mode, and the camera recovered from standby mode triggered by the auto meter off function, the distance information displayed on the SB-800 changed. This issue has been resolved.

佢原本個AF 就慢..而家就BACK FOCUS..玩咩

TOP

Hail , cop

TOP

回覆 3# 的帖子

咩事搵差人?!

TOP

哎唷 我一直都有講呢d野

TOP

1.10都好似出左成個幾月

[ 本帖最後由 s84292 於 2008-12-28 16:09 編輯 ]

TOP

回覆 6# 的帖子

咁又點? 唔係人人都會一出新firmware就upgrade, 唔係人人都知有哩D問題同成因與及解決方案!

我唔講你又知唔知firmware 1.03 有 back focus問題?
如果你知咁你又有冇出過post提醒其他D300網友點去解決呢?

哩個世界太多你哩D咁既人只識回"OLD POST"笑人而唔去細看人地出POST既重點/動機係分享解決方案經驗, 唔係話個firmware岩岩出!

[ 本帖最後由 明日之星 於 2008-12-28 18:32 編輯 ]

TOP

原帖由 明日之星 於 2008-12-28 18:12 發表
咁又點? 唔係人人都會一出新firmware就upgrade, 唔係人人都知有哩D問題同成因與及解決方案!

我唔講你又知唔知firmware 1.03 有 back focus問題?
如果你知咁你又有冇出過p ...


1.10 都已經FIX左,點解仲要講返1.03的問題?

你講個問題,我就係無遇到過,佢唔講我先唔知,咁到底的確係咪一個必然會發生的問題,無結論

點解要轉到OLD POST呢個話題, 點解要兩個月之後再黎提呢個蟲?
我唔明白你的用意,也唔明白呢篇文章你想討厭的重點在哪裡

呢個問題之前已經討論過,都已經反映過,你要O係NIKON解決左呢個問題兩個月之後先黎再提醒各位

[ 本帖最後由 s84292 於 2008-12-28 20:07 編輯 ]

TOP

回覆 8# 的帖子

> 1.10 都已經FIX左,點解仲要講返1.03的問題?

唔係人人都知出咗1.10呀老友!

點解唔比人講返1.03的問題?
仲用緊1.03既朋友一定知道NIKON個幾月前出咗1.10?
一定會留意個問題係1.03先有1.10就冇?


> 你講個問題,我就係無遇到過,佢唔講我先唔知,咁到底的確係咪一個必然會發生的問題,無結論

你無遇到過就唔比人提/討論?

> 點解要轉到OLD POST呢個話題, 點解要兩個月之後再黎提呢個蟲?


我都係最近有問題上網CHECK其他FORUM先知1.03有BACK FOCUS問題, 有一個同樣問題既網友話試過1.10解決了

我唔係日日都check住NIKON有冇出新firmware,
我都係早兩日先知有1.10出咗, 我好心提下其他有需要既人唔得?


> 我唔明白你的用意,也唔明白呢篇文章你想討厭的重點在哪裡


你既回應同果d恥笑人既"OLD POST"有咩分別?


> 呢個問題之前已經討論過,都已經反映過,你要O係NIKON解決左呢個問題兩個月之後先黎再提醒各位


呢個問題之前已經討論過,,都已經反映過 <-- any link? Thank you.

[ 本帖最後由 明日之星 於 2008-12-28 21:30 編輯 ]

TOP

原帖由 明日之星 於 2008-12-28 21:10 發表
> 1.10 都已經FIX左,點解仲要講返1.03的問題?

唔係人人都知出咗1.10呀老友!

點解唔比人講返1.03的問題?
仲用緊1.03既朋友一定知道NIKON個幾月前出咗1.10?
一定會留意個問題係1.03先有1.10就冇?


> 你講 ...

冷靜下先
BACK FOCUS問題嘅話....要比人題先發覺有問題嘅話.跟本就冇乜大問題..
當然冇人成日上網睇 fw .但更加冇人成日上網睇 bug .發覺部機有問題.打上代理就ok拉

TOP