[技術討論] Acronis True image HD 磁碟移轉軟體, 請問有無試過?

Acronis True image HD 磁碟移轉軟體,

請問有無試過? 因為我想轉現有細SIZE 2.5" SSD 去 NVME SSD.
用緊WIN 7, 唔知得唔得呢?
底版係MSI Z77-G41
THANKS

本帖最後由 kk70 於 2019-3-28 16:56 編輯

Sorry for my previous post!

There is another easier way. By cloning Windows 7 to NVMe SSD.
The main process:
1.       Install Windows 7 on a regular drive.
2.       Then connect the NVME SSD as a secondary drive to your computer.
3.       Install the proper driver for the NVMe SSD.
4.       Clone Windows 7 with NVMe driver to NVMe SSD using SSD cloning software.
After the clone, you can set Windows 7 NVMe SSD as the boot device and boot your computer from the cloned drive because the needed driver is also cloned over.

https://www.backup-utility.com/w ... 7-to-nvme-4348.html

TOP

只可重新安裝,不可磁碟移轉.
教程:如何在NVMe SSD上安裝Win 7系統!

其實兩者差別很小,不必磁碟移轉. ...
kk70 發表於 2019-3-27 14:15


咁如果  舊SSD , 去新2.5" SSD, 請問是否用這SOFTWARE 就得呢?
THANKS.

TOP

舊SSD , 去新2.5" SSD<—得
2.5" SSD 去 NVME SSD<—唔得,有冇CHING可以教路

利申:都試過

TOP

用過ssd>ssd係快靚正
不過試用版無clone功能
另外clone完ssd最好做返一次4k alignment

TOP

只可重新安裝,不可磁碟移轉.
教程:如何在NVMe SSD上安裝Win 7系統!

其實兩者差別很小,不必磁碟移轉. ...
kk70 發表於 2019-3-27 14:15



你確定唔可以轉移? 我見人WIN7先裝NVME DRIVER, 再CLONE去NVME SSD得喎.

TOP

我曾用此軟件clone Win 10 Pro 由SSD往NVME. 冇問題。

TOP

剛剛用Acronis True Image 2018 clone OS碟(850 Pro 256GB) 去隻970 Pro (512GB) ~ 用manual setting (ie. OS照舊是256GB, 另256GB unallocated) ~ 跟著再format "unallocated" 256GB 為drive D.  Reboot ~ 一切正常運行.

TOP

大把免費clone software可做到:

1. EaseUS ToDo Backup
2. Minitool Partition Wizard

最近試過,1可以係Windows環境下做cloning方便D

TOP