[操作疑難] [已解決]Synology 手痕由Adaptive Load Balancing轉咗LACP

本帖最後由 t19922006 於 2018-1-30 17:15 編輯

Synology 手痕由Adaptive Load Balancing轉咗LACP, 之後完全連唔到隻NAS
原本隻EA6350 唔support LACP, 係唔係轉咗隻support LACP 應該無問題?
有無人試過?



成幾升級做EdgeRouter™ X SFP + UniFi® AP AC LR

回覆 1# t19922006

重置管理者密碼與網路設定
    https://www.synology.com/zh-tw/k ... our_Synology_NAS#t2

TOP

This is because the link was down as it is not able setup link aggregation (LACP)

原本隻EA6350 唔support LACP, 係唔係轉咗隻support LACP 應該無問題?
Yes, if the new switchport has LACP enabled.

I think that you should reset the network settings as per #2 first.

TOP

多謝兩位的解答

TOP

轉左LACP而Router/Switch唔support唔係問題
但係你唔可以兩條線插
因為LACP negotiation fail情況下, 多數會各自變翻獨立interface, 等於冇開任何load balancing一樣, 兩條線插switch/router會loopback

TOP

回覆 5# KinChungE

我係小數, 試過reboot WiFi router and NAS, 插一條線都係唔得
加上是不能說OS, reset 有啲難同風險,所以先成幾升級router

TOP

回覆  KinChungE

我係小數, 試過reboot WiFi router and NAS, 插一條線都係唔得
加上是不能說OS,  ...
t19922006 發表於 2018-2-2 10:55


俾我會搵linux live cd boot起佢, mount partition再改config

TOP

回覆 6# t19922006

upgraded to ER X  SFP + UniFi® AP AC LR ??

TOP

回覆 8# ngsamson

星期六會去屯門resaller買

TOP

想問一下已解決, 即是要點先可解決,講下比我地學習一下, thanks

TOP