[操作疑難] Direct LAN cable connection between NAS

Hi all,

I would like to direct connect Synology and QNAP via LAN cable without going through switch.

Both Synology and QNAP I set fixed IP on all network ports.

What do I need to set on both side?

same network is ok.

TOP

邊部机有兩個lan,果部机做host,第一個lan fix ip,插switch.入去改config做router。
另一部机改自動取得IP(DHCP)插host第二個lan。
如果兩部机都只有一個lan就搵一個插wifi手指,設定好無綫上網,抆lan綫入去改config做router。另一部机改自動取得IP(DHCP)插host個lan。

TOP

邊部机有兩個lan,果部机做host,第一個lan fix ip,插switch.入去改config做router。
另一部机改自動取得IP(DHCP)插host第二個lan。
如果兩部机都只有一個lan就搵一個插wifi手指,設定好無綫上網,抆lan綫入去改config做router。另一部机改自動取得IP(DHCP)插host個lan。
無名火 發表於 2020-9-20 12:58


Thanks for reply,
both NAS have 2 or more RJ45 ports.

Do you mean one of the NAS became gateway?
If according to what you said,
I just need to set one of the port on NAS A to point to another port at NAS B as gateway?
Fixed IP = no need DHCP host.

TOP

第二個lan要DHCP ,他們第二個lan行另一網段,samba folde指定ip連接

TOP

Hi all,

I would like to direct connect Synology and QNAP via LAN cable without going through switch ...
volospin 發表於 2020-9-19 15:02



    如兩面個 IP 都 fix 好應該沒其他要 set, 就是可睇使用而 set app 吧,比好 map drive.

當然,這是說兩個 NAS 都有 其他 LAN 線去connect 主 network 之下。

沒有的話, 有接主 network 那個要 set virtual switch, 好麻煩的。

TOP

Hi all,

I would like to direct connect Synology and QNAP via LAN cable without going through switch ...
volospin 發表於 2020-9-19 15:02

你 2 部機都有 2 個 LAN ports 的話 , 用其中一個直連無咩要搞
淨係將個 2 部機直連既 LAN port set 係同一個 subnet 就可以

TOP