[Windows 10] Build 1511 Version 10586.3 & Driver Signature Enforcement

當 clean install Win10 10240 時曾面對一個問題, 有個非常舊冇 digital signature 嘅 64-bit driver install 極都 install 唔到.  後來用 cmd prompt (admin) 然後打以下 command 成功 bypass driver signature enforcement:

bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON

係多咗個水印喺 desktop, 但至少 load 到個 driver.

Update 去 10586.3 後問題出現了.  以上方法唔再可行, 即係噤:

2015-11-15 13:03

但用 <shift>-Restart 方法 仍可暫時 bypass 問題 (直到下次重新開機)....


回覆 1# seemebreakthis

C Hing pls check whether the below message can help :

Please check if you have performed these steps to disable the driver signature enforcement in Windows 10 Technical Preview.

a. Press the Win + C and click on PC settings.  

b. Switch over to the “Update & recovery” section.

c. Then click on the Recovery option on the left hand side.

d. Once selected, you will see an advanced startup section appear on the right hand side. You will need to click on the “Restart now” button.

e. Once your Computer has rebooted you will need to choose the Troubleshoot option.

f. Then head into Advanced options.

g. Then Startup Settings.

h. Since we are modifying boot time configuration settings, you will need to restart your computer one last time.

I. Here you will be given a list of startup settings that you can change. The one we are looking for is “Disable driver signature enforcement”. To choose the setting, you will need to press the F7 key.

Hope this information helps.


呢個係每次 boot 機都要 set 既方法,好煩。
我都想知有無方法可以永久 disable.


回覆 2# TimmyL

係呀呢個同我講個 <shift>-restart 方法基本上一樣!  不過都多謝師兄嘅幫忙


you may try
Driver Signature Enforcement Overrider 1.3b

好似自己sign 都得,但好煩,google 下


回覆 5# platinum

掂!  唔該師兄!