[Windows XP] Windows 10 Homegroup問題

Ahmok

未UP上去1709前,1511版本係冇問題, A (主機WIN10)+B (手提WIN7)+C (HTPC),全都可以連到主機,提取檔案.但主機UP咗上去1709之後,祗有主機見到其餘兩部機,提取檔檔案.但其餘兩部機就連主機都見唔到,不管你重新建立群組,重設密碼....都不能由網絡見到主機.請問係邊度嘅設定出咗問題?

wongck5

回覆 1# Ahmok

將WIN10的網路設定為私人網路，預設是公用網路，改後在同一網絡的電腦都可以互相溝通

Ahmok

要點改呢師兄......今早將個群組及密碼重覆做咗幾次,都祗有WINDOWS 10主機見到其餘兩部機,反過嚟B+C就見唔到A主機...

Ahmok

現在重死,剛剛UP上1803,成個WORKGROUP冇咗.....

wongck5

回覆 4# Ahmok

Windows 設定  --> 網路設定 --> change network setting

Fanolian

現在重死,剛剛UP上1803,成個WORKGROUP冇咗.....
Ahmok 發表於 2018-5-1 13:59

1803 取消咗homegroup 呢個功能。

sowwos

冇咗HOMEGROUP,如何在兩部電腦之間存取及共享?

wongck5

回覆 7# sowwos


以前在 Win7和8.1我都有用 Homegroup，但自從用了 Win10，我就懶得再set Homegroup 了。
在網絡設定為私人網路，開檔案總管，click 左欄的網絡，就已經睇晒在家中同一網絡的 PC，我都唔知 Homegroup還有什麼用處。要共享就要好像Homegroup般去設定要共享的item

sowwos

回覆 8# wongck5

共享的人員無法加入workgroup中的其他電腦作共享

pc1668

The problem:
Win 10 client device name not recognized in intranet after 1803 update.

Details:
Three PCs with details as follow.
Version 1803 / PC2 / 192.168.1.2
Version 1803 / PC3 / 192.168.1.3
Version 1709 / PC4 / 192.168.1.4

All the PCs (as well as NASes) are connected via Netgear GS308 Gigabit switch.

Before updating to 1803, all PCs can be accessed using shared path command \\devicename.  Eg. \\PC2.

After updating to 1803, \\devicename is not working anymore.  I have to use the physical address instead.  Eg. \\192.168.1.2

PC4 remains at 1709 and it can access all PCs within the intranet, eg. \\PC2 and \\PC3.   It can also be accessed by PC2 and PC3 using the command \\PC4.

Any idea?


...

.....