[Windows 10] Regedit修改三樣野,Load Game可以快十幾秒

大家可能都知道嘅,但都分享一下,
當係留個記錄。原來唔止L2 cache要改,
仲有DisablePagingExecutive、
LargeSystemCache都要改一下

如果不打機,Windows 10性能會否亦有改進?

via HKEPC Reader for Android

TOP

如果不打機,Windows 10性能會否亦有改進?

via HKEPC Reader for Android
daemongmong 發表於 2020-11-16 16:35
估計差唔多,
呢個setting主要for打機

TOP

本帖最後由 toylet 於 2020-11-16 23:10 編輯
大家可能都知道嘅,但都分享一下,
當係留個記錄。原來唔止L2 cache要改,
仲有DisablePagingExecutive、
L ...
eric6a01 發表於 16/11/2020 16:04

thank you, your honor!
edit:
咦這 2 個改動原來早於 WinXP 就有人講...

Source: https://www.sevenforums.com/perf ... -windows-7-ssd.html
The default value for LargeSystemCache is 0. It is normally enabled (set to 1) only on servers or client systems used primarily as servers. It was not intended for general use. I am not convinced it is even supported in Windows 7. In supported systems it would allow the file cache to grow to the point where applications ran short. On a server that is a good thing because a large file is good when sharing files on a network and nobody cares how well applications run on a server. But in a system used primarily to run applications that would be a bad thing. Leave it at 0.

Source: https://www.pcdvd.com.tw/showthread.php?t=837430
+1
不要太相信網路上流傳的那些所謂優化檔
以訛傳訛的東西混在裡面的太多
這2個值一般用戶沒有修改的任何必要
不會有任何明顯的好處
相反的也許會有害
你已親身經歷了
32位元系統抓不到4G目前是不可能改變的事實
這2個值更是一點關係也沒有


可能是源頭:
https://zhuanlan.zhihu.com/p/39606336
电脑添加内存条后要如何设置注册表?

电脑执行多任务或者大型3D场景出现卡顿的情况,我们都会选择增加电脑内存来解决,但很多用户却反映增加内存后电脑并没有什么明显改善,只有在视频处理或者PS时才会显现出效果。

其实这是Windows系统要照顾没有配备大容量内存的电脑而进行的设置,为的是让系统能更好更稳定的运行。而我们的电脑增加过内存后,就可以通过修改注册表的方式来打破这些限制,感受大内存带来的完美体验。


How to maximize your level 2 cache.
https://www.dell.com/community/W ... 2-cache/td-p/201841
5.  Microsoft makes this registry key zero (256 KB), and in doing so
    limits the processor secondleveldatcache to 256 KB.  This statement
    is in conflict with the Knowledge base article, which states, "If
    the value of this entry is 0, the system attempts to retrieve the
    L2 cache size from the Hardware Abstraction Layer (HAL) for the
    platform. If it fails, it uses a default L2 cache size of 256 KB.
    Note the key phrase "If it fails".

TOP

Thanks

TOP

TOP