anyone update from ubuntu 10.04 to 10.10 ?

有無人update 左??

Soon when I have time.

TOP

留意左#ubuntu  IRC channel幾日, 好似好多奇怪問題:-o
不過我本身唔用ubuntu. 只係有VM

TOP

desktop 同notebook 都由10.04 update 去10.10, 暫時未有問題出現

TOP

acer notebook 安裝了 lubuntu 10.10

TOP

回復 4# 伽利略

我想問下點UPDATE, 係唔係係UPDATE MANAGER 度UP?

TOP

回復  伽利略

我想問下點UPDATE, 係唔係係UPDATE MANAGER 度UP?
ahkeung 發表於 2010-10-14 10:46


官方方式
https://help.ubuntu.com/community/MaverickUpgrades

TOP

我update 左啦~~
連帶唔小 software 都update 左~

bluefish 新version 好用左~

TOP

Updated to 10.10 from 10.04, the DVB card (using driver cx23885) does not work now. Otherwise do not see any problem.

TOP

Updated to 10.10 from 10.04, the DVB card (using driver cx23885) does not work now. Otherwise do not ...
rtau 發表於 2010-10-15 01:37

I have a Mygica X8558pro PCI-E card also using cx23885. I found that the v4l-dvb version, and therefore the version that comes with a linux distribution (e.g. Ubuntu), doesn't work. I have to modify cxusb.c to comment out one line in order to make it work:

Before change:
==============
static int cxusb_d680_dmb_streaming_ctrl(
                struct dvb_usb_adapter *adap, int onoff)
{
        if (onoff) {
                u8 buf[2] = { 0x03, 0x00 };
                cxusb_d680_dmb_drain_video(adap->dev);
                return cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON,
                        buf, sizeof(buf), NULL, 0);
        } else {
                int ret = cxusb_ctrl_msg(adap->dev,
                        CMD_STREAMING_OFF, NULL, 0, NULL, 0);
                return ret;
        }
}
===============

After change:
===============
static int cxusb_d680_dmb_streaming_ctrl(
                struct dvb_usb_adapter *adap, int onoff)
{
        if (onoff) {
                u8 buf[2] = { 0x03, 0x00 };
                // cxusb_d680_dmb_drain_video(adap->dev);
                return cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON,
                        buf, sizeof(buf), NULL, 0);
        } else {
                int ret = cxusb_ctrl_msg(adap->dev,
                        CMD_STREAMING_OFF, NULL, 0, NULL, 0);
                return ret;
        }
}
==========

As a test, you may download my version at below link (note that I've tested this version on Ubuntu 10.10 for ASUS u3100 and MagicPro proHDTV Dual, but not for Mygica x8558pro because it is on another machine running Debian):
http://www.sendspace.com/file/sgccz2

Build instruction:
1. untar to a directory
2. cd v4l-dvb
3. make clean
4. make distclean
5. make
    You'll get an error on firedtv module.
    Use an editor to edit v4l/.config to change the line,
    CONFIG_DVB_FIREDTV=m
         to
    CONFIG_DVB_FIREDTV=n

     Then run 'make' again (but don't run make clean and make distclean)
6. make install
7. might need to reboot the computer

TOP