[操作疑難] 新買USB wifi 5Ｇ wifi adaptor

rebmup

佢有linux driver, 但我唔識裝，有無師兄可以教教我？

Thanks !

我行Ｍint linux !






Linux Bluetooth Driver link below
https://drive.google.com/drive/f ... JSg5jbr?usp=sharing

KinChungE

正常呢D大路realtek chipset, 唔使裝已經kernel本身包埋

rebmup

正常呢D大路realtek chipset, 唔使裝已經kernel本身包埋
KinChungE 發表於 2018-11-26 11:06

    唔裝driver只有2.4Ｇ用到，windows 10 都係要上driver先用到 5Ｇ，否則只能用2.4Ｇ !

KamSing

Maybe checking the supporting frequency first

1. iwlist wlan0 freq

複製代碼

chancho

try this
https://github.com/gnab/rtl8812au

rebmup

Maybe checking the supporting frequency first
KamSing 發表於 2018-11-26 11:51

    13 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
          Current Frequency:2.452 GHz (Channel 9)

上面插左一張 pci N- card  同一個 usb wifi adaptor!   

我估尼個係pci n-card,  我估而家我都係用佢上緊網!

rebmup

try this
chancho 發表於 2018-11-26 14:33

    師兄,  我係新手,  睇唔明!

chue

13 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Chan ...
rebmup 發表於 2018-11-26 18:06

    應該有得 SET

rebmup

應該有得 SET
chue 發表於 2018-11-26 19:18

點set ?

via HKEPC Reader for Android

god_md5

sudo apt update
sudo apt install dkms
sudo apt install rtl8812au-dkms
dkms status