ATI 4350 output LPCM (no sound card)

Hello!, I want to share my experience.

Hardware : ATI 4350 + Asus M2A-VM (690G) + Onkyo 605 (all thru HDMI)
Software : Vista SP0 + PowerDVD 9 ultra (select HDMI & PCM)
Driver : ATI 9.2 + Realtek ATI audio 2.19

Transformers : Dolby true HD 5.1 will downgrade to Dolby true HD 2.0 : LPCM 48kHZ / 24 bits

Wanted : DTS-HD Master 5.1 : LPCM 48kHZ / 24 bits 5.1
Wanted : DTS 5.1 : LPCM 48kHZ / 16 bits 5.1

The diff . of sound effect is big between 16 bits & 24 bits when I set the volume in Onkyo 605 the same at "55".  I think 24 bits / 96kHZ will be much better if use HDAV1.3 sound card.

try to upload the picture here but overloaded.  

Pls try this link  http://www.hd.club.tw/thread-16017-2-1.html

Anybody try ATI46xx or 48xx to play up to "LPCM 96kHZ / 24 bits" ?, thank you.

[ 本帖最後由 pkseto 於 2009-3-24 09:13 編輯 ]

PowerDVD 9 deluxe 係得2-channel
升級PowerDVD 9
極致版 吧

TOP

need to use PDVD 9 Ultra version

http://www.cyberlink.com/product ... /compare_en_US.html



[ 本帖最後由 Oops 於 2009-3-24 09:13 編輯 ]

TOP

oh typing error.  it is ultra version already

TOP

我都想知....點output....

C Hing...你有沒試過用VLC/KM player, 睇ripped BD 出來的 .mkv 檔, 可以 output Dolby HD 出來...

我試緊,但未買 HD amp...

TOP

回覆 3# 的帖子

係咪ati hdmi 只可出 pcm 2.0!!
用on board 光纖/同輖 就一定可出dts/dd 5.1/7.1
or 換nivida 可出lpcm 7.1

TOP

回覆 6# 的帖子

ATI 4xxx 可以出 5.1/7.1的...我張2400就只是2.0

TOP

SURE 5.1 .  POWERDVD 9 SHOW 24 BIT / 48KHZ.  PLEASE READ THE LINK FROM HD CLUB ON THE TOP.  I AM NOT KIDDING.  I  ALMOST BUY A WATER HDAV 1.3 SOUND CARD FROM MY COLLEAGUE'S FRIEND IN TAIWAN (ONLY AROUND HKD 1200 (NT5000/4.3) BUT FAILED.  SO TRY THIS WAY.  THE CHEAPEST WAY TO PLAY BLU-RAY ISO FROM COMPUTER  WITH BETTER SOUND EFFECT

[ 本帖最後由 pkseto 於 2009-3-24 13:08 編輯 ]

TOP

如果 xp 行sp3 + km player出到 lpcm 5.1嗎?

TOP

回覆 9# 的帖子

no XP. Vista is a must

TOP