最近攞返部ironman第一代kossel出來印野

manqwe

set 熱床溫度只要上過70度,吹件風扇就會全開,係software同直接係部機教都係咁,
無開熱床就咁用software入m106,107可以開關風扇
我個部仲係用緊原本塊mega2560,只係自己加左熱床同relay
係咪marlin有野未setup好哩,唔該
成年無印野好多野唔記得哂

dtom

回覆 1# manqwe

PLA_PREHEAT_FAN_SPEED 改 0

2018-4-9 00:01

manqwe

無用!
好奇怪,如果我set 熱床上到90度一上過現在溫度就會開風扇,
但係到左90度再set返低過90度就會立即關風扇,
係咪底板壞哩,可能要加個風扇開關....

g2david

You need to change the firmware.
Marlin 1.1.8 can do manually bed leveling
Or autotune by RichCattell -> Perfect dimension after tunning.
https://github.com/RichCattell/Marlin