[雜物]Label it 電錶計量 渣古蛋。(END08/06)

本帖最後由 風十三 於 2020-6-5 00:06 編輯

Label IT! Label Printer "Casio"
Reset後,可以Print嘢。

Brennenstuhl PM230 "230V/50Hz/13A"
顯示屏有一條粗灰線

渣古蛋,拆開後原來不是原整的頭象






起Bid $40
每Bid $10
交易地點:樂富地鐵站
交易時間:預下午4:30後
不接受下Bid者:pomkon

ching 想問吓,部 Label Printer 個 Err 係咪長著,有無試過 reset 佢?

https://support.casio.com/storage/en/manual/pdf/EN/005/KL-60_EN.pdf


ERR!

Memory data has become
corrupted for some
reason.

Initialize the Label
Printer.

TOP

本帖最後由 風十三 於 2020-6-5 00:05 編輯

回覆 2# 1qwer

成功Reset咗,可以Printing

TOP

回覆 3# 風十三


    Ok, Thanks.

ching 若果有閒可以試下跟說明書第六頁的做法,說明書都有提到長時間唔用可能要 reset 一下。

https://support.casio.com/storage/en/manual/pdf/EN/005/KL-60_EN.pdf

Resetting the Memory
You  should  reset  the  memory  of  the  Label  Printer  before  using  it  for  the  first
time, after you have not used it for a long time, or if nothing happens when you
turn power on, even after you change the batteries.
Important!

Resetting Label Printer memory clears its memory of all input data.
To reset the memory
1.  Make sure that Label Printer power is off.
2.  While holding down the PRINT and ESC keys,
press ON/OFF to turn power on.
3.  Keeping PRINT  and  ESC  held  down,  
releasethe  ON/OFF key only.
4.  Release PRINT and ESC keys.
5.  Press SET to initialize the Label Printer or ESC to abort the reset operationwithout initializing anything.

See “Initializing the Label Printer” on page E-14 for information on the initial
default settings of the Label Printer following the reset operatio

TOP

回覆  風十三


    Ok, Thanks.

ching 若果有閒可以試下跟說明書第六頁的做法,說明書都有提到長時間唔 ...
1qwer 發表於 5/6/2020 00:03

Reset 完 正常翻 可 print



via HKEPC IR Extreme 4.2.3 - Android(4.2.0)
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

TOP

回覆 5# 風十三


    Very Good !

Have a nice day.

TOP

請問 Brennenstuhl PM230 "230V/50Hz/13A" 買咗幾耐?有無跌過落地或拆開過?謝謝。

TOP

回覆 7# 永恆的回憶
無趺過落地,無拆開過,
不過換電池位,因為太實,開蓋時整崩咗

TOP

$40.....

TOP

$50~~~

TOP