ASUS想謀殺我粒U \ _ /"

我用緊P5Q-E既
岩岩係官網見到16/12發佈左新BIOS
即刻走去刷黎玩下
我之前由1306升去1406,D超頻設定冇變過,係WINDOWS下用軟件刷
今次由1406升去1703,因為用WIN7用唔設之前個軟件
走左入BIOS入面用個EZ FLASH 2黎刷
一刷完黑屏,因為超頻既關係,好正常
跟住走去載入之前既超頻設定,又黑屏?唔通新BIOS超頻能力差左?
入到BIOS睇,嘩!全部唔同哂...520X9,1:1,CL5-3-3-3,DIMM 1.9V,呢D都唔係問題
VCORE 1.65V,SB 1.4V,睇到O哂,如果著到機長行而我又唔發覺,粒U熱死都似...

有冇人知點解會咁?剩係WINDOWS下刷先可以保留超頻設定?

That's why you are always recommended to load default settings after bios update.
Sometimes the new bios code can be so different that it messes up ur previous settings.

TOP

原帖由 trentcys 於 2008-12-25 14:38 發表
That's why you are always recommended to load default settings after bios update.
Sometimes the new bios code can be so different that it messes up ur previous settings.

我係LOAD完DEFAULT再載入超頻設定檔
佢將我原本既超頻設定檔改哂
要重新SET過哂

為慎重起見,我而家重新燒過機測過哂D野既穩定度= ="

[ 本帖最後由 LKNim 於 2008-12-25 14:41 編輯 ]

TOP

原帖由 trentcys 於 2008-12-25 16:38 發表
That's why you are always recommended to load default settings after bios update.
Sometimes the new bios code can be so different that it messes up ur previous settings.

yes, it's the golden rule before you flashing your BIOS

TOP

原帖由 Kio26 於 2008-12-25 14:41 發表

yes, it's the golden rule before you flashing your BIOS

呢樣野都冇乜所謂,黑屏,最多咪REBOOT一次CLR CMOS
問題係佢改左我既超頻設定檔

TOP

1.65V

勇士咁博呀

TOP

原帖由 LKNim 於 2008-12-25 14:43 發表

呢樣野都冇乜所謂,黑屏,最多咪REBOOT一次CLR CMOS
問題係佢改左我既超頻設定檔


It's quite common sense....
Please see #2 line 2...

TOP

原帖由 trentcys 於 2008-12-25 14:58 發表


It's quite common sense....
Please see #2 line 2...

哦...
即係我1306升去1406冇事係好彩
1406升去1703有事係正常

TOP

原帖由 LKNim 於 2008-12-25 14:40 發表

我係LOAD完DEFAULT再載入超頻設定檔
佢將我原本既超頻設定檔改哂
要重新SET過哂

為慎重起見,我而家重新燒過機測過哂D野既穩定度= ="

X2 1406上1703,我粒E72變1.65V..............我一見到真係超頻設定檔又要SET過

[ 本帖最後由 mh使者 於 2008-12-25 15:05 編輯 ]

TOP

原帖由 LKNim 於 2008-12-25 15:01 發表

哦...
即係我1306升去1406冇事係好彩
1406升去1703有事係正常


Load唔返上一版BIOS save o既oc profile唔算係問題lor.

TOP