Kingston KHX2000C9AD3T1K3/6GX DDR3 2000 6G Kit (2Gx3) 3-Channel Pack

提示: 作者被禁止或刪除 內容自動屏蔽

CL9-10-9 timing差D wor,先前CL9-9-9都好DD
以前(09年中打後)D 1600C8 跑2133 CL999 1.6v MEMTEST PASS都可以
這model 8-8-8-24, 我估9成9唔得!

TOP

Is it a good buy ?
I want to o/c it to 8-8-8-24
Doraemon2009 發表於 2010-5-9 19:30


呢set ram 我用華碩 x58 板行2000,未試過boot得著機,可能係我人嘅問題。

TOP

提示: 作者被禁止或刪除 內容自動屏蔽

TOP

TOP

回復  SevenL


    at default timing?
Doraemon2009 發表於 2010-5-9 21:00


All default timing at 1.65V.

TOP

Very useful link for your reference.
Mitsume 發表於 2010-5-9 22:02


Great link. Thanks.

But I am too scare to rise the DIMM voltage above 1.65V. It might burn my CPU.

TOP

Great link. Thanks.

But I am too scare to rise the DIMM voltage above 1.65V. It might burn my CPU ...
SevenL 發表於 10/5/2010 00:20


as long as your QPI/VTT voltage is within 0.5V of your VDIMM, it should not have any big problems lower than 1.7V.

Anyway, don't try if you can't take the risk

TOP

呢set ram 我用華碩 x58 板行2000,未試過boot得著機,可能係我人嘅問題。 ...
SevenL 發表於 2010-5-9 20:53


The problem is "華碩 x58 板行2000". Try using 1.5V for VTT.

I am not kidding.

TOP

The problem is "華碩 x58 板行2000". Try using 1.5V for VTT.

I am not kidding.  ...
K_C_ 發表於 2010-5-10 10:25


Already tried 1.575V VTT which was stable with another set of DDR3 2000 ram (1GB X 3). Still not boot.

Anyway, thx ching!

TOP