can activate AAM under raid 0 ?

i am using two 6400AAKS(raid 0),it is very very noisy. after doing some reserach,i found that some post said i can only activate AAM function  under IDE mode..so,my questions are:

1)can i change the raid mode to IDE mode and operate AAM function and switch back to raid mode without any problem?

2)after using some time,i found the speed of my raid drop can Defragmentation help?or the detection is not correct?cpu usage-1%


我使用的兩個6400AAKS (支援RAID 0 ) ,非常非常嘈雜。做一些reserach後,我發現,一些post說,更改AAM只能在IDE模式下運作..所以,我的問題是:

1 )我可以更改到IDE模式進行AAM運作,然後切換回RAID模式而沒有任何問題嗎?

2 )使用一段時間後,我發現我的RAID速度下降,重組可以幫助?或檢測是不正確的? CPU使用率- 1 %

[ 本帖最後由 toweraviation 於 2009-3-21 01:44 編輯 ]
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

1-OK

2-don't know

TOP

raid 0為左快
整慢AAM咪又慢返

定係你只係想傳輸快?

TOP

原帖由 lastphoenix 於 2009-3-21 12:41 發表
raid 0為左快
整慢AAM咪又慢返

定係你只係想傳輸快?


you are right,i wish my disks to become faster,but then i found that they are really really noisy. so,i decided to give up performance

TOP

原帖由 Athlon神64 於 2009-3-21 01:26 發表
1-OK

2-don't know


try try sin

[ 本帖最後由 toweraviation 於 2009-3-21 13:34 編輯 ]

TOP