OCZ Vertex firmware 0112 vs 1199 vs 1275

upgrade 左1275.. 同1199差唔多.


----

戇居load番舊version firmware。。。0112 系慢過1199左 。。。系唔系唔可以就咁restore image 要從新install 同alignment?!!好哂時間。。。

官網收番起1199,可能有大問題....

1199比較..0112 細block快過1199

[ 本帖最後由 komeclub 於 2009-3-29 16:47 編輯 ]
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

0112 係第一批既firmware.  比1199 舊. 但1199 好似有D問題.....

TOP

原帖由 Marshall 於 2009-3-22 17:03 發表
0112 係第一批既firmware.  比1199 舊. 但1199 好似有D問題.....

好彩未up唧

TOP

其實有無得唔係 windows 到 flash firmware???....

剛剛發現... 如失速後... flash firmware 都可以令SSD  返生...

TOP

因為 12xx 黎跟....

TOP

原帖由 jycw 於 2009-3-22 19:30 發表
其實有無得唔係 windows 到 flash firmware???....

剛剛發現... 如失速後... flash firmware 都可以令SSD  返生...


That is because before flashing the firmware the program will perform a full security erase of all flash blocks....but the good thing is, it resets the SECURE_ERASE command's required password as well so in case if you screw up that password and cannot use HDDErase then you can still flash the firmware to solve this issue...trouble is somehow Jumper is difficult to borrow...

NOTE: The action that cost lifespan of the SSD is ERASING the block, not WRITE NOR READ. So everytime you erase your SSD to restore performance is actually shorterning it's lifespan. So do it at your own risk.

[ 本帖最後由 sunderstan 於 2009-3-22 22:46 編輯 ]

TOP

update 1275 效果同1199有得揮 加左圖

TOP

原帖由 sunderstan 於 2009-3-22 22:44 發表


That is because before flashing the firmware the program will perform a full security erase of all flash blocks....but the good thing is, it resets the SECURE_ERASE command's required password as we ...

does it work on all ssd or ocz only ?

TOP

原帖由 GOD_DAMNIT 於 2009-3-29 16:54 發表

does it work on all ssd or ocz only ?


Uncertain, because not all SSDs supports SECURE_ERASE function IMO, and also not all firmware flashing program will perform ERASE after new firmware is flashed...so in other words..I don't know but trial and error will tell

TOP

原帖由 sunderstan 於 2009-3-29 17:32 發表


Uncertain, because not all SSDs supports SECURE_ERASE function IMO, and also not all firmware flashing program will perform ERASE after new firmware is flashed...so in other words..I don't know but  ...

how about mtron ?

TOP