分享: 著左ICH9R RAID, 又外置 RAID 會有少問題

本身用緊 Gigabyte EP35-DS3R
有 8 個 sata port.
6 個由 Intel ICH9R 控制 (在 BIOS 內設定左 RAID 模式)
2 個由 Gigabyte SATA2 控制 (在 BIOS 內設定左 IDE 模式)

3 隻 HD:
ICH9R port 0 -> 500G (Raid Volume 0) <Data Drive>
ICH9R port 1 -> 500G (Raid Volume 0) <Data Drive>
ICH9R port 2 -> 無接
ICH9R port 3 -> 無接
ICH9R port 4 -> 外接左 esata 尾板 <-> 外接 Raid 1 HD (兩隻 640G)
ICH9R port 5 -> 外接左 esata 尾板

Gigabyte SATA2 port 0 -> 320G <System Drive>
Gigabyte SATA2 port 1-> 無接


Boot 機時, 會顯示 Invalid Device Geometry. (Controlled by Raid BIOS)
入左 windows, 入去隻外接 Raid HD 某d folder, 好無里頭會突然 hang 左果個 folder window.

搞左好耐, 而家變成咁就無問題:
ICH9R port 0 -> 500G (Raid Volume 0) <Data Drive>
ICH9R port 1 -> 500G (Raid Volume 0) <Data Drive>
ICH9R port 2 -> 無接
ICH9R port 3 -> 無接
ICH9R port 4 -> 無接
ICH9R port 5 -> 外接左 esata 尾板

Gigabyte SATA2 port 0 -> 320G <System Drive>
Gigabyte SATA2 port 1-> 外接左 esata 尾板 <-> 外接 Raid 1 HD (兩隻 640G)


真係玩死. 底板著左 RAID mode, 又外接 Raid HD 就會奇奇怪怪.
玩 Raid 真係幾煩.

原帖由 laputafish 於 2009-3-25 09:27 發表
本身用緊 Gigabyte EP35-DS3R
有 8 個 sata port.
6 個由 Intel ICH9R 控制 (在 BIOS 內設定左 RAID 模式)
2 個由 Gigabyte SATA2 控制 (在 BIOS 內設定左 IDE 模式)

3 隻 HD:
ICH9R port 0 -> 500G (Raid Volume 0 ...

Yes true, but every trial and error is a gain of experiance or knowledge and you're learning a whole sorts of new things. Think that way and you will become a RAID expert soon

My board uses ICH9R and I use SB for RAID 0 set up too. But it refuse to boot if I set the "Speeding HDD" which will use the Silicon 5723 chip and the PC will stuck at "checking NVRAM" while booting. That issue is easily fixed when disabling Marvell's IDE/eSATA boot rom option~

TOP

提示: 作者被禁止或刪除 內容自動屏蔽

TOP

原帖由 sunderstan 於 2009-3-25 09:34 發表

Yes true, but every trial and error is a gain of experiance or knowledge and you're learning a whole sorts of new things. Think that way and you will become a RAID expert soon

My board uses  ...

thank you for sharing.

原帖由 ringo 於 2009-3-25 10:48 發表
我ich9r >> ssd raid0
        port2 >> 500gb hdd
        port3 >>> 640gb hdd
        port4>>>> dvd rw rom

adaptec 5805 >>>raid0 死雞 15k.6
無任何問題
j&w x48板

你 bios 度係唔係 設定為 raid 模式?

TOP

提示: 作者被禁止或刪除 內容自動屏蔽

TOP