裝左OS 落Hardware Raid 0後, 一定要放雙Windows CD 嚮CDROM 入面先入到Windows

好奇怪. 我set 好左個RAID 0 之後就裝Windows 啦, 一切都好正常.
點知有一次我拎返隻Windows CD 出黎, 跟住reboot, 部機過左POST 之後就出左句 "DISK BOOT FAILURE", 入唔返Windows. 奇就奇左我放返隻CD入去, reboot 部機, 咁就入得返Windows 喇喎!
我部機config:
AMD Athlon 64 X2 3600+
Magic-Pro A2N5 Extreme
8GB Adata DDR2-800 Gaming Series
Sapphire Radeon HD2600 PRO (plugged in 1st PCI-e slot)
Adaptec 4805SAS Raid Card (plugged in 2nd PCI-e slot)
2x Hitachi 74G 15k rpm SAS harddisks (RAID 0)

試過Windows XP x64 同 Windows 7 RC x64 都係咁
底板整係插左雙IDE LG DVD Writer, Boot sequence set 左 CDROM, RAID card, Floppy

有無師兄有類似遭遇呢??

[ 本帖最後由 leenigel 於 2009-6-6 12:18 編輯 ]

hv u set the boot seq piority to the raid 0 first??

TOP

最後我發現SATA 要唔插野先可以正常boot 機. 就算插一隻SATA HDD 落底板都會boot 唔到個RAID 0...

TOP

I encountered the same problem and asked the same question before without any response from the brothers.

TOP

回覆 4# 的帖子

so have you solved it urself?

TOP

於BIOS設定硬碟啟動次序是RAID0呢個先

TOP

原帖由 oo2oo299999 於 2009-6-7 18:40 發表
於BIOS設定硬碟啟動次序是RAID0呢個先


No use even if you select RAID as the boot device.:funk:   I still have not found the solution.

TOP

似係bios 既bug,我記得用過 a2am-hd 都有類似既 booting問題,最後係發現 ide 插左cdrom (slave) 會有問題,set 番做master 就冇事,同埋你個bios 係咪已經update最後version ?

TOP

回覆 8# 的帖子

ide 呢樣野係好多*nix 既system, 都係唔可以無master 直接set slave 黎boot機.  係windows我乜都唔理.

TOP