LSI MegaRAID SAS 8708ELP / 8708EM2 / 8888ELP New Firmware Release - 02/19/2010

************************************

LSI Logic MegaRAID Firmware Release

************************************

Release date: 02/17/10

======================
Supported Controllers:
======================
MegaRAID SAS 8704ELP
MegaRAID SAS 8704EM2
MegaRAID SAS 8708ELP
MegaRAID SAS 8708EM2
MegaRAID SAS 8880EM2
MegaRAID SAS 8888ELP


Component:
=========
SAS MegaRAID Firmware Release for MegaRAID 1078 Controllers
Release date: 02/17/10


Version Numbers:       
===============
Current Firmware Package:      11.0.1-0026 (EF-P13)
Current Package Details:       APP-1.40.132-0796_BB-1.00.00.01-0011_BIOS-2.07.00_WEBBIOS-2.2-20-e_11-Rel
                             
Previous Firmware Package:     11.0.1-0023 (EF-P9)
Previous Package Details:      APP-1.40.102-0773_BB-1.00.00.01-0011_BIOS-2.07.00_WEBBIOS-2.2-19-e_10-Rel


Bug Fixes and Enhancements:
===========================
LSIP200043562        (DFCT)        Firmware retries cause driver timeout when drive responds with Sense 0x02, Test Unit Ready
LSIP200018678        (DFCT)        Invalid Pass Phrase Characters on 1078DE Controller
LSIP200018619        (DFCT)        Battery Failure Behavior is Incorrect
LSIP200018715        (DFCT)        No Limit for Successive Relearns on Battery
LSIP200043584        (DFCT)        Controller does not recover from 06/29/00 errors on drives with media errors and I/O
LSIP200051172        (DFCT)        No Retry on return code of IDNF


Installation:
=============
Use MegaCLI to flash the SAS controllers.  The DOS version of MegaCLI is included
in the zip file.  Windows and Linux MegaCLI can be downloaded from the download
section of www.megaraid.com.

Command syntax:  MegaCli -adpfwflash -f SAS1078_FW_Image.rom -a0

Firmware Download:
http://www.lsi.com/DistributionS ... P-1.40.132-0796.zip


Remark:
請注意,此Firmware只適用於LSI MegaRAID SAS 8704ELP、8708ELP、8888ELP等LSI 1078 Base的Raid Card使用,而LSI 8308ELP、8344ELP等LSI 1068 Base的Raid Card絕對不能使用。

Thank

TOP

already update, thank

TOP

Thanks, new firmware again

TOP