[raid 卡] LSI MegaRAID Storage Manager (MSM) 11.08.03-03發佈, 支持CCPro 2.0~04/02/2012

******************************************************

LSI Corp. MegaRAID Storage Manager Release for Windows

******************************************************

Release Date: 03/30/12
======================

Supported Controllers
==================

MegaRAID SAS 9265-8i
MegaRAID SAS 9285-8e
MegaRAID SAS 9285CV-8e
MegaRAID SAS 9266-4i
MegaRAID SAS 9266-8i
MegaRAID SAS 9240-4i
MegaRAID SAS 9240-8i
MegaRAID SAS 9260-4i
MegaRAID SAS 9260CV-4i
MegaRAID SAS 9260-8i
MegaRAID SAS 9260CV-8i
MegaRAID SAS 9260DE-8i
MegaRAID SAS 9261-8i
MegaRAID SAS 9280-4i4e
MegaRAID SAS 9280-8e
MegaRAID SAS 9280DE-8e
MegaRAID SAS 9280-24i4e
MegaRAID SAS 9280-16i4e
MegaRAID SAS 9260-16i
MegaRAID SAS 8704ELP
MegaRAID SAS 8704EM2
MegaRAID SAS 8708ELP
MegaRAID SAS 8708EM2
MegaRAID SAS 8880EM2
MegaRAID SAS 8888ELP
MegaRAID SAS 8308ELP*
MegaRAID SAS 8344ELP*
MegaRAID SAS 84016E*
MegaRAID SAS 8408E*
MegaRAID SAS 8480E*
MegaRAID SATA 300-8ELP*

*These older controllers should work but have not been tested.


Component:
=========
SAS MegaRAID MSM Windows
Release Date: 03/30/12


Version Numbers:        MSM
===============                =====       
Current version                11.08.03-03
Previous version        11.06.00-03


Bug Fixes and Enhancements:
===========================
This is a major product refresh with numerous bug fixes and enhancements.  Please refer to the readme.txt in the released package.


=============
Fixes/Updates
=============
11.08.03.03
Defects:
1)LSIP200212517                MSM updates the Drive Stand-by time even the Control is disabled in Manage Power savings dialog.
2)LSIP200221880                Defect created for code check in
3)LSIP200210894                Error code 0x4d when trying to perform instant secure erase
4)LSIP200221694                MSM fails to set Consistency Check properties, CLI is okay
5)LSIP200221484                MSM connected to remote VMWare ESX 4.1 host will not refresh automatically and stops reporting AENs

11.08.03.02
Defects:
1)LSIP200211038        (HSA0375) MSM : Lack of events during OS boot up when there are 2 cards installed.
2)LSIP200211507        MSM reported a RAID1 with 4 drives as a RAID17 VD
3)LSIP200212123        (HSA0xxx) 11.08.03-00, the email always contains NFO?even actual event is CRITICAL or other level
4)LSIP200209241        MACON: on running CC, the no of corrections done does not come properly.
5)LSIP200211315        (#29498.2) MSM AEN Date/Time Failed To Match With Firmware Data/Time
6)LSIP200210757        (RW LSIP200210020) MSM has some typing errors in making unconfig good
7)LSIP200211857        MSM display "16.16" and should be "16" when creating a VD with JBOD drives on the controller
8)LSIP200210045        No events are generated when MSM is launched for the first time.
9)LSIP200211483        The sort order for MSM log events is not sorting in sequential order
10)LSIP200197065        (Defer LSIP200184971) In the Event description field on remote MSM for the ESXi 5.0 server inaccurate progress is report
11)LSIP200212116        (None) Multiple MegaRAID cards installed system that email function only works when one of the cards
12)LSIP200211591        MSM 11.08.02-07/When right clicking on BBU and selecting Set Learn Cycle Properties, the bottom sentence is cut off.
13)LSIP200212113        MSM needs to display appropriate warnings to user when user creates R0 SSCD
14)LSIP200212034        (RW LSIP200211089) MSM has many typing, grammar and description errors in simple creation of VDs.
15)LSIP200211740        defect for removing duplicate entries in menu_config for IR LSIP200199672 and LSIP200199669
16)LSIP200210956        Maximum allowed unconfig good drives on a controller displays a decimal number


11.08.03.00
Enhancements:

1) LSIP200148629          PERC 8.1:  End to End Data Protection (EEDP)

Defects:

1)LSIP200209871           MSM reports wrong location for LBA over 2 TB
2)LSIP200210817           (HSA0373) MSM : PCI ID contents of event ID 0irmware initialization started?is incorrect.
3)LSIP200210818           (HSA0374) MSM : Unable to report the event in /var/log/messages.
4)LSIP200199123           PD Reset warning event message is not getting generated in MSM for SATA PD only      
5)LSIP200210824           (RW LSIP200210016) MSM show blank  the description in event
6)LSIP200211037           (HSA0376) MSM : Displayed Month is incorrect during Oct-Nov when PatrolRead, CC is running.
7)LSIP200210581           (RW LSIP200209669) MSM JLogger always showing PHY value as 0
8)LSIP200210564           (RW LSIP200210044) Getting empty events in MSM when SAS data cable is inserted or removed from controller
9)LSIP200211295           MSM upgrade fails due to CLI version difference in Linux
10)LSIP200211598         MSM needs to update the Suppport Link and Help Link from http://www.LSICorp.com to http://www.LSI.com
11)LSIP200209673         Invader:- Flashing 16MB FW with MSM hits PROGRAM(SRR0/1,ESR) exception
12)LSIP200210956         Maximum allowed unconfig good drives on a controller displays a decimal number
13)LSIP200210757         (RW LSIP200210020) MSM has some typing errors in making unconfig good
14)LSIP200211089         MSM has many typing, grammar and description errors in simple creation of VDs.
15)LSIP200185624         MACON: megacli gets  installed on installing RWC2 instead of CmdTool

11.08.02.07
Defects:
1)LSIP200211237           MSM is allowing dimmer switch features for IBM
2)LSIP200210567          (RW LSIP200209119) Readme file has some junk letters in RWC2 and MSM in 11.08.02.03 builds
3)LSIP200210726           Default value for Disk Cache Policy during VD creation changes after first VD is created.
4)LSIP200200126           Snapshot feature set to  take the snapshot for every reboot  is not generating the snapshot view.
5)LSIP200196755           Cant create VD with HSP if trying to create VD using simple mode with different PD size in MSM

11.08.02.06
Defects:
1)LSIP200209303        Doesn't allow to create DHSP with specific application       

11.08.02.05
Defects:
1)         LSIP200209487             Learn Properties Dialog box does not complete message
2)         LSIP200209652             MSM is not supposed to check the popup status if it is not installed
3)         LSIP200210020             MSM has some typing errors in making unconfig good
4)         LSIP200209405             (HSA0365) MSM : Severity Level of Event is not changeable.
5)         LSIP200209498             Battery Predictive Failure message displays twice in MSM / Reported as "not Required"
6)         LSIP200209406             (HSA0366) MSM : Fails to login to other MSM client.
7)         LSIP200209119             Readme file has some junk letters in RWC2 and MSM in 11.08.02.03 builds
8)         LSIP200209669             MSM JLogger always showing PHY value as 0
9)         LSIP200210044             Getting empty events in MSM when SAS data cable is inserted or removed from controller
10)        LSIP200199561             Needs attention at status properties under dashboard tab in MSM is showing irrespective of VD/PD state
11)        LSIP200209293             Suspend all operation in MSM under group show progress is not suspending PR
12)        LSIP200210016             MSM show blank  the description in event                     
13)        LSIP200197065             (Defer LSIP200184971) In the Event description field on remote MSM for the ESXi 5.0 server inaccurate progress is report

11.08.02.04
Defects:
1)        LSIP200209357         SNMP Trap Alert should be sent when one phy connector between Liberator card and SAS expander is degraded

11.08.02.03
Defects:
1)      LSIP200199604   (RW LSIP200198599) MSM Unexpected Sense PD info CDB value is not proper
2)      LSIP200199533   (NA) Invalid timestamp for boot time events
3)      LSIP200198596   MSM does not allowing the Patrol Read to resume if suspended previously
4)      LSIP200199478   (CL LSIP200198578) (HSA0360) MSM : When PR Stop after suspend, MSM Show Progress shows PR suspended
5)      LSIP200149147 Controller time synch up with System time if the skew is more than 90 sec

11.08.02.02
Defects:
1)         LSIP200197134             MSM reports incorrect "0" for the passes for dignostic test.
2)         LSIP200197135             (HSA0358) MSM : Fails to retreive events during OS shutdown, boot up.
3)         LSIP200187248             Invader:- When running the Erase function Suspend all option is enabled in MSM.
4)         LSIP200187770             MSM: Suspend All button is enabled even after suspending all the supported BG operations
5)         LSIP200186571             MSM: During upgrade of MSM 8.32.00 to 8.33.00 pop is appearing .
6)         LSIP200186572             MSM: uninstallation of MSM 8.33.0000 prompts for reboot.
7)         LSIP200198599             MSM Unexpected Sense PD info CDB value is not proper
8)         LSIP200198600             Duplicate SLIR Defect: Bios Version not displayed correctly in Solaris SPARC
9)         LSIP200198587             MSM does not list the access policy and power state Properties for Blocked WT Virtual Drives.

11.08.02.01
Defects:
1)      LSIP200187932   IMR:When using 11.08-01 MSM to convert from JBOD to Unconfigured good FW hits Montask

11.08.02.00
Defects:
1)        LSIP200187313        Link to LSI.com needs to be updated
2)        LSIP200187518        (RW LSIP200185508) Max Power Save mode can not be enabled on Drive Groups with MSM or CLI
3)        LSIP200187315        Unable to get updated remaining capaciity and voltage info  when selecting BBU refresh properties with supercap
4)        LSIP200187088        Menu name "Manage MegaRaid Advanced Options" needs to be renamed for IBM.
5)        LSIP200188001        MR Monitor logs are getting cleared when logged off and logged in to MSM 11.08.01.00
6)        LSIP200188221        Cannot schedule Patrol Read in MSM
7)        LSIP200187314        Unable to set learn cycle properties from the BBU menu with supercap
8)        LSIP200187315        Unable to get updated remaining capaciity and voltage info  when selecting BBU refresh properties with supercap
9)        LSIP200146146        the foreign drives comes under the DG.
10)        LSIP200134477        when high contrast is set in windows,in manage advanced software window all the activated sotware options dosent come.
11)        LSIP200134463        when high contrast is set in windows, the contents in the dashboard dosent come.
12)        LSIP200188254        Dummy defect: MSM doesn't recieve AENs from ESXi 4.x machines
13)        LSIP200187562        Installing MSM in windows does not create the entry in Add/remove programs  list of Control panel.


11.08.01.00

Enhancements:
1)        LSIP200082262  12 Gb/s functionality
2)        LSIP200077381  USB offload implementation

Defects:

1)      LSIP200185508  Max Power Save mode can not be enabled on Drive Groups with MSM or CLI
2)      LSIP200186523  Unable to create Volume for Gen1 card in Advance mode in all platforms
3)      LSIP200163910  MSM should report that Forced WB VDs are not affected when controller detects BBU disabled
4)      LSIP200151109  VD capacity display misaligned in MSM in RHEL
5)      LSIP200148127  MSM kernel related events not logging in the MSM log
6)      LSIP200148128  In Configure Alerts, we can configure the Alert Delivery Method
7)      LSIP200149795  (RW LSIP200148888) (HSA0345) MSM : Fails to provide event log info from ID 386 and above to Windows app log.

11.08.00.01

Enhancements:
1)            LSIP200148574 Update MSM installer to a later version

Defects:

1)         LSIP200149992 (XB066009) The test email, and we assume others that MSM will send is in breach of RFC2821
2)         LSIP200148497 (Defer LSIP200060975) DSIII: MSM did not show the current setting when change controller PS setting
3)         LSIP200185524 RWC2: Unable to install RWC2 11M08 Build 11.08.00.00 due to install script error
4)         LSIP200150404 (Defer LSIP200149186) MSM failed to upgrade to local mode
5)         LSIP200148496 (Defer LSIP200173411) DSIII-Should not allow to select PS policy at create VD for mfc bit x08
6)         LSIP200184745 MSM 11.08.00.00 installation does not show all numeric values available to user
7)         LSIP200148401 (Defer LSIP200173990) DSIII:Mercury Select Power Save during create VD  should be disable for Mercury controller
8)         LSIP200151457 Running "Uninstaller.sh"  or clicking uninstaller icon does not uninstall MSM_11.08.00-00 application in local mode
9)         LSIP200185533 Dummy defect to resolve the merge conflicts
10)        LSIP200150667 MSM not displaying remaining capacity while creating VD and not allowing to create VD if clicked on DG on SWR.
11)        LSIP200150663 (RW LSIP200150265) MSM "create virtual drive" button is enabled even after creating maximum 8 VD's on SWR.
12)        LSIP200150589 MACON: on lauching MSM the create VD icon is disabled
13)        LSIP200150585 (RW LSIP200149870) (RW LSIP200148304) macon: option to save TTY log comes for swr controller.
14)        LSIP200149879 Macon:SCU: Events are not comming in both MSM and Storelib Test.
15)        LSIP200149607 SWR:Macon: Set PatrolRead properties option not available in MSM/RWC2
16)        LSIP200086959 Needs 10M06 MSM patch that includes addtional device tree fix to take care of SEP multi port display issue
17)        LSIP200151532 SNMP:TMM01 BBU FW version  shown wrongly in HP Openview Browser
18)        LSIP200149729 MSM:MR Monitor logs are not updating in NAT Environment
19)        LSIP200148129 Email notification from MSM having the minimum details
20)        LSIP200151532 SNMP:TMM01 BBU FW version  shown wrongly in HP Openview Browser
21)        LSIP200124228 MegaRAID controllers where lsi_mrdsnmpmain is chewing up 100% CPU apparently in a "busy wait"
22)        LSIP200044340 Memory usage of SNMP service increases linearly (memory leak) when storeLib reports events continuously.



11.08.00.00

Enhancements:

1)LSIP200159733   Update MSM with Oracle JRE v.16u24
2)LSIP200148328   MSM in NAT Environments
3)LSIP200112226   Provide native 64 bit Linux MSM
4)LSIP200072686   Update MR SAS LSI applications for VMWare ESXi MN Release


Download:
http://www.lsi.com/downloads/Pub ... .03_Windows_MSM.zip

great and thanks for sharing.

TOP

Thank....!

TOP

要注意此版send alarm email可能有問題

TOP

本帖最後由 kenn 於 2012-4-13 15:21 編輯

I have problems in installing this version (11.08.03.03) as well as the earlier version issued in January (11.12.01.01) which is no longer seen in LSI  website now.  Tried many times but failed.
I have to re-install v.11.06.00.03.

TOP

I have problems in installing this version (11.08.03.03) as well as the earlier version issued in Ja ...
kenn 發表於 2012-4-13 15:19

LSI即將推出新版MSM 12.01.03,改左唔少野,其中一項就係修正Alarm Email問題

TOP