[raid 卡] LSI MegaRAID SAS 9265/9260/8888ELP/8308ELP Driver v6.600.23 Release ~ 06/01/2013


LSI Corp. MegaRAID Windows Drivers


Release Date: 05/30/13

Supported Controllers

MegaRAID SAS 9270-8i
MegaRAID SAS 9271-4i
MegaRAID SAS 9271-8i
MegaRAID SAS 9271-8iCC
MegaRAID SAS 9286-8e
MegaRAID SAS 9286CV-8e
MegaRAID SAS 9286CV-8eCC
MegaRAID SAS 9265-8i
MegaRAID SAS 9285-8e
MegaRAID SAS 9240-4i
MegaRAID SAS 9240-8i
MegaRAID SAS 9260-4i
MegaRAID SAS 9260CV-4i
MegaRAID SAS 9260-8i
MegaRAID SAS 9260CV-8i
MegaRAID SAS 9260DE-8i
MegaRAID SAS 9261-8i
MegaRAID SAS 9280-4i4e
MegaRAID SAS 9280-8e
MegaRAID SAS 9280DE-8e
MegaRAID SAS 9280-24i4e
MegaRAID SAS 9280-16i4e
MegaRAID SAS 9260-16i
MegaRAID SAS 9266-4i
MegaRAID SAS 9266-8i
MegaRAID SAS 9285CV-8e
MegaRAID SAS 8704EM2
MegaRAID SAS 8708EM2
MegaRAID SAS 8880EM2

For older MegaRAID controllers including 1068 legacy controllers, use the Windows inbox driver.

SAS MegaRAID Drivers for Windows
Release Date: 05/30/13

Version Numbers:       
Current Version                6.600.23.00
Previous Version        6.506.01.00 and 6.506.02.00

This package contains signed drivers for the following Windows versions:

Version 6.600.23.00
Windows Server 2012 x64
Windows 8 x86
Windows 8 x64
Windows 2008 x86
Windows 2008 x64
Windows 2008R2 x64
Vista x86
Vista x64
Windows 7 x86
Windows 7 x64
XP x64
Windows 2003 x86
Windows 2003 x64

Install the driver from the appropriate folder for your Windows version.

Bug Fixes/Enhancements:  
SCGCQ00330224 - (Closed) - System fails to wake up from Hibernate
SCGCQ00365382 - (Closed) - The Size of the DCMD buffer passed to the FW was less during the Driver Initialization .
SCGCQ00387275 - (Closed) - R1 64K SR 64QD is 38% down with FP enabled
SCGCQ00364039 - (Closed) - Wrong Calculation in Start_lba span for PRL11 Configuration.
SCGCQ00371968 - (Closed) - Error handling in "get_arm_from_strip " and "get_arm" for PRL11 Configuration
SCGCQ00386647 - (Closed) - in OEM server, the server never boots to OS, keeps rebooting itself.
SCGCQ00402255 - (Closed) - INTERRUPT EXCEPTION NOT HANDLED (megasas2.sys)
SCGCQ00279284 - (Closed) - Montask line 1187 in file ../../raid/1078dma.c when formatting VD's under Windows 2003
SCGCQ00419719 - (Closed) - I/O's became unresponsive after triggering OCR
SCGCQ00378958 - (Closed) - BSOD (D1) DRIVER_IRQL_NOT_LESS_THAN_EQUAL during installing windows2003 X64 os
SCGCQ00399853 - (Closed) - Out of Bounds Read for fucntion CompleteScsiRequest and updateIometric
SCGCQ00280221 - (Closed) - Cannot install Win2003 x86 on the Invader using driver
SCGCQ00382594 - (Closed) - The hibernation (s4 sleep state) is not working on windows server 2012
SCGCQ00400113 - (Closed) - Limited number of MSI-X interrupt vectors assigned toadapter in Windows
SCGCQ00402788 - (Closed) - iMR SSD JBOD poor IOps performance compared to IT/IR
SCGCQ00406532 - (Closed) - IO Command timeout value for TAPE devices need to be set from OS instead of default timeout value
SCGCQ00259242 - (Closed) - 4K sector support for Windows 8
SCGCQ00386120 - (Closed) - Add Multiphase Resume Feature For Windows 8 Driver .
SCGCQ00368375 - (Closed) - Support additional MSIX vectors on
SCGCQ00293737 - (Closed) - LSIP200211759: Add 3108 device for OEM
SCGCQ00399052 - (Closed) - OEM iMR RoMB PnP ID addition to MegaRAID softwares.
SCGCQ00361248 - (Closed) - Boot the system to iMR mode if NVRAM is not initialized
SCGCQ00354616 - (Closed) - The 4-port board should be renamed to 9361-4i and other renamed 9360 8i/4i
SCGCQ00319108 - (Closed) - PRL11 Uneven Span support added in Windows Driver
SCGCQ00290518 - (Implemented) - Driver needs to allow enabling/disabling OCR without reboot being required.
SCGCQ00392108 - (Implemented) - Add support for OEM 12Gbit/s SAS MegaRAID, iMR, and IT/IR adapters, to Windows & Linux Drivers, and MSM/RWC utility
SCGCQ00293736 - (Closed) - LSIP200211761: Add device id for OEM
SCGCQ00375473 - (Implemented) - Add PnP IDs to MR 5.5 & 5.6
SCGCQ00386111 - (Closed) - Add PnP Ids for OEM, this should be added to Windows Drivers.
SCGCQ00357251 - (Implemented) - Add 3108 device ID for OEM (PR SCGCQ00356047)
SCGCQ00391739 - (Closed) - Request to change the OEM Subsystem Device IDs
SCGCQ00390957 - (Closed) - Add new PCI ID
SCGCQ00278272 - (Implemented) - Device ID for OEM added in 6.0 release
SCGCQ00386687 - (Port_Complete) - support for add MultiphaseResume to the Win8 Driver added
SCGCQ00377212 - (Port_Complete) - Add PnP IDs to MR 5.4 & 5.5
SCGCQ00299632 - (Port_Complete) - LSIP200231605:OEM MROMB -- 240PD Raid Key PnP IDs

Installation Instructions:
Please refer to the MegaRAID SAS Device Driver Installation Guide.

http://www.lsi.com/downloads/Pub ... s_Signed_Driver.zip

已update, 感謝告知




thanks ching