Win 7 1920x1080 不能夠出 full-screen

AMD790 - HD3300
ATI Catalyst™ 9.10 Suite for Windows 7 (32-bit)

有無朋友可以幫我?

何謂出唔到 full-screen?

TOP

我想你遇到的是overscan/underscan的問題...

你只要開啟Catalyst Center的Advance mode, 到Display properties的tab, 搜尋你想修改overscan/underscan的Monitor, 然後右click這個Monitor, 進入Monitor的setting畫面, 在Setting裡就可以找到overscan/underscan的設定介面, 只要調整好overscan/underscan的百分比, 這樣, 袒面應該就可以填滿整個Monitor..

TOP

原帖由 keroic 於 2009-10-28 14:45 發表
我想你遇到的是overscan/underscan的問題...

你只要開啟Catalyst Center的Advance mode, 到Display properties的tab, 搜尋你想修改overscan/underscan的Monitor, 然後右click這個Monitor, 進入Monitor的setting畫面 ...

I've the same problem last night when upgrade to Win7 on 780G mainboard.
I'll try your suggestion tonight, thank you very much.

TOP

回覆 4# 的帖子

What Monitor you use?

For Windows 7.. it will auto detect what monitor you use... if you monitor not support that resolution... you can't select any other resolution you want!!

TOP

多謝keroic,終於找到overscan/underscan的設定介面

TOP

用左overscan/underscan就唔係pixel to pixel
畫質會差左

TOP

原帖由 whitty 於 2009-10-28 16:27 發表
What Monitor you use?

For Windows 7.. it will auto detect what monitor you use... if you monitor not support that resolution... you can't select any other resolution you want!!

When I use XP pro is very good and fit cover on my LG 1920x1080 32" TV through HDMI cable and it has already set to point to point, but on Win7 it can't fully cover on the screen.

[ 本帖最後由 gowan 於 2009-10-29 01:36 編輯 ]

TOP

I found it to adjust and now is full screen
Thank you so much.
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

TOP