i7 930新手超頻求助(已解決)而家行緊4GHz開心晒=]

本帖最後由 Dinolam 於 2010-5-5 03:39 編輯

而家長期行緊190x20 3.8G, 非常穩定. 電壓為全自動, 但vcore為1.376v遠高於各師兄的電壓.
試過全自動電壓跑200x19, DRAM更高至1.72v.
爬過文試下手動調電壓, 點知連機都開吾到, 底板燈閃左幾次, reboot bios.
想上4G就更加無辦法, 係我粒930體質太差, 底板吾夠穩定, 火牛吾夠力, 定係配置負荷太重呢?
希望各位師兄可以幫幫手.

PC配置:
i7 930
X58A-UD3R
A-DATA DDR3 1600 2Gx3
WD 1002FAEX 1TB x2
GTX 480
MaxPower Vortex C700
NOCTUA NH-D14

Try search for OC guide on i7 on the internet.  Some very useful guides can be found.  Try the one on "Overclxxkers" site.  It's much better to read thru one of those OC guides to have an understanding on various settings.  

FYI, you should be able to OC an i7 930 with vcore around 1.3v.  At least, that is the vcore I'd seen people on the net claiming to have when running 4G.  QPI needs to be bumped up a bit too.

TOP

Try search for OC guide on i7 on the internet.  Some very useful guides can be found.  Try the one o ...
dumchidumchi 發表於 2010-5-5 00:31

Oh Yes! Thank you dumchidumchi!
I already visited that about overclocking forum and got many quite usefull informations.
Now my PC running @4GHz, that solved my heart knot and feel very happy!
I will test that setting are stable or not after.

I'm really appreciate for your informations, Thanks again!

i7 930@4GA.jpg
2010-5-5 02:00

TOP

Oh Yes! Thank you dumchidumchi!
I already visited that about overclocking forum and got many quite  ...
Dinolam 發表於 2010-5-5 02:01



    最後你係點既SET法SET到4G@@"
大家一樣底板...講尼分享下

TOP

最後你係點既SET法SET到4G@@"
大家一樣底板...講尼分享下
ken0569 發表於 2010-5-5 02:10

200x20 @4GHz
vcore 1.318v
QPI/VTT 1.335v
CPU PLL 1.88v
DRAM 1.66v
DDR3 8-8-8-24 2T
呢個設定據聞比較適合新1批i7 930, 電壓要高少少.
其實我之前都set過電壓但諗住行3.8G, 所以完全無諗過QPI要set甘高.
另外仲有1d bios既原廠設定我無校, 有可能導致到之前連機都開吾到.

TOP

本帖最後由 dumchidumchi 於 2010-5-5 03:50 編輯

Glad I can help...remember Google is your friend!  Just type in what you want to find and you will get the info you want.

For my OC to 4G, CPU PLL is set to default.  Vcore is at 1.29xxv and QPI/VTT is at 1.3v.  DRAM is running at 8-8-8-20-1T.

Remember to run some stress test programs, ie, OCCT, IBT, Prime95 to test your OC.

TOP

200x20 @4GHz
vcore 1.318v
QPI/VTT 1.335v
CPU PLL 1.88v
DRAM 1.66v
DDR3 8-8-8-24 2T
呢個設定據聞比較 ...
Dinolam 發表於 2010-5-5 03:35


我想知...RAM行1T同2T有咩分別^^"?

TOP

我想知...RAM行1T同2T有咩分別^^"?
ken0569 發表於 2010-5-5 03:53

1T比較快,2T比較穩定
8-8-8-24呢個設定相當保守, 慢慢再 fine tune.

TOP

本帖最後由 dumchidumchi 於 2010-5-5 04:34 編輯

It is the command rates per cycle that your memory does.  1T should give you a "better" score when benchmark.  But I don't really pay too much attention with the benchmark scores...1T or 2T on these Dominator don't really make much difference for the things I do on this PC.

I want to tighten up the speed on the RAM too...just too lazy to mess with the settings again.

TOP