Q9400 OC

HI ALL.
今日手癢走去OC
Q9400
333>>400 X8 =2.66GHZ>>3.2GHZ
VOLTAGE SET AUTO...
RAM 4GB用800MHZ
NOW FSB:RAM=1:1
應該算好吧...
感覺上快左D...熱左D...開左冷氣CORE大約50-55度左右
CPU IDE用20W左右
已燒機無問題...

但有樣野想問...
1.我果2條RAM本身係ADATA DDR2 1066+,果到寫住加V去到2.3V,就可以升到(當然要BIOS到SET)
但SET左之後...WINODW話SYSTEM要REPAIR.要入碟...但我又無碟...只好落返去800MHZ到用....唔知有咩METHOD可以避免以上情況出現而又可以上到1066呢??
2. Q9400 有冇c兄試過可以上到幾多ghz呢??
3. 1066+,係唔係指條ram極限唔係1066Z,而可以仲上1200呢??

thx

1. With your current o/c, DDR2 800 is OK. Setting the ram to 1066 will not be faster.
2. To go above 3.2, try 425...430...450...You should be able to get to 3.6 with under 1.4V (manually set voltage for better results).
3. If you clock is set to 450, you ram will become 900. Again, no need for 1066.

3.6GHz is the maximum on my system. I think my ram DDR 800 is the bottleneck. You might get more than 3.6 with your 1066 ram.

TOP

本帖最後由 小豪 於 2010-8-15 01:40 編輯

如果係R0核心,有機會唔使加壓就上到3.6GHz (450x8)。
不過問題反而在底板度,如果係P45應該北橋加0.1-0.2V就得,P35或其他chipset就好難講...另外VTT都要加0.1
我呢粒唔加壓就上到3.6,好處係C1E時仍然可以自動降電壓..如果set左手動電壓C1E時就只會降倍頻。

電壓最好唔好set auto...好多板set auto時會自動狂加電壓...可能根本唔使加咁多。最好set default然後逐少逐少試。
3.6.jpg

TOP

THX 各位C兄先...但想問問點先可以知道我粒CPU係唔係R0??係唔係在CPU COVER上睇??可唔可以經電腦SOFTWARE CHECK到??

TOP

Google search "CPUID" and go to the link to download.

After running CPUID you will see

CPUID.jpg
2010-8-15 17:24

TOP

check左係r0了...陣間等閒試上3.6加燒機先...

其實r0有咩好??好似話係第一版,d料會"令"d??

TOP

CPU制程係越新越好~

TOP

我兩部 Q9400 . 一部上3.6 GHz , 另一部 3.4GHZ

TOP

提示: 作者被禁止或刪除 內容自動屏蔽

TOP

咁既電緊系上唔到4G  加多起碼3格

TOP