[測試] TP-Link TL-WR1043ND - Printer Server setup

本帖最後由 火鳥人 於 2010-4-11 15:44 編輯

我都係轉貼返來....

Step 0: Use "Putty.exe" software, connect with router use SSH

Step 1: Enable JFFS
On the Administration>>>Management tab scroll down and click enable under jffs2 and disable on clean jffs. Apply Settings

Step 2: Enable SSH
Click the Services tab and click enable under secure shell. Apply Settings

Step 3: Enable USB Support
Click the Services tab and click usb enable everything except usb storage. Apply Settings

Step 4: SSH into the router and enter the following.

    cd /jffs
    wget http://downloads.openwrt.org/sna ... _0.93-1_atheros.ipk
    ipkg install p910nd_0.93-1_atheros.ipk
    rm p910nd_0.93-1_atheros.ipk


Step 5: Launch p910nd on startup
In the web interface, click tab administration tab then click commands. Enter the following code and click "save startup".
( reboot router,  mount printer out,  printer ip should be 192:168.1.1:9100 )

    /jffs/usr/sbin/p910nd -b -f /dev/usb/lp0 0
    /bin/mkdir -m 755 -p /dev/usb
    /bin/mknod -m 660 /dev/usb/lp0 c 180 0


Step 6: Connecting to the Print server on windows computers.


我都好想買呢隻 Router 試試, 上左 DD-WRT 實在太多野玩了, 尤其是PPTP功能.
有沒有人有經驗以上程序是否可行.. ?

is it work? anyone know???

TOP

真.飛鳥 user 試過......佢話OK 喎...!!

TOP

我都試過~掂!, printer可以share, 不過部printer的scanner功能廢左

TOP

請問我跟住step 做....但係都print 唔到....我用既係canon LBP3050...請指教!!

TOP

can use ftp instead of putty?

TOP

我仲以為講緊WIFI(web) AIO printer...

TOP

有冇PRINTER SUPPORTING LIST??

TOP