kwai 當前離線
初級會員
原帖由 trentcys 於 2009-2-2 02:05 發表 Check if ur SATA was set to AHCI or RAID modes... Then switch them back to IDE, SATA or Compatibility modes.
TOP
極串~hkalex 當前離線
Anti-X 大聯盟
進階會員
FullHD8 當前離線
中級會員
原帖由 極串~hkalex 於 2009-2-2 16:53 發表 今日買左隻新既 ST3320613AS 7200.11 320GB 單碟 個 Firmware 係 CC2F
原帖由 kwai 於 2009-2-2 16:06 發表 我已經用緊IDE MODE, 都係呢個情況. 但係sd22 係唔係唔俾update?
trentcys 當前離線
特級會員
jasonchow739 當前離線
原帖由 kwai 於 2009-2-2 23:32 發表 原來佢個pn 係for -300, 336, 我o個隻係-301 唔俾up. 有冇師兄係呢個case?
happy_gemini 當前離線
原帖由 trentcys 於 2009-2-3 11:51 發表 ES.2正式出左update喇 http://seagate.custkb.com/seagat ... ch.jsp?DocId=207963
原帖由 happy_gemini 於 2009-2-3 13:49 發表 So, seagate officially confirms the update as SN06 and SN16 respectively, right? Thank you for your devoted efforts for updating all brothers here!
原帖由 trentcys 於 2009-2-3 14:14 發表 你有冇試過用新呢個official o既file update? 我update唔到, 話detect唔到個drive 唔知關唔關底板事, 定我已經係SN06佢唔俾再up
原帖由 jasonchow739 於 2009-2-3 13:03 發表 師兄我同你一樣 301 ,現在唔知點攪。