本帖最後由 008325 於 2014-8-6 01:36 編輯
大家以後要勤力d update 了 唔好再抱住冇咩事就唔搞既心態
For users who have not encountered any of the symptoms stated above, we highly recommend downloading and installing DSM 5.0, or any version below:
-For DSM 4.3, please install DSM 4.3-3827 or later
-For DSM 4.1 or DSM 4.2, please install DSM 4.2-3243 or later
-For DSM 4.0, please install DSM 4.0-2259 or later
DSM can be updated by going to Control Panel > DSM Update. Users can also manually download and install the latest version from our Download Center here: http://www.synology.com/support/download.
Synology Continues to Encourage Users to Update
Thank you for your patience as we continue to investigate the ransomware "SynoLocker" which is currently affecting certain Synology NAS users.
We are fully dedicated to investigating this issue and possible solutions. Based on our current observations, this issue only affects Synology NAS servers running some older versions of DSM (DSM 4.3-3810 or earlier), by exploiting a security vulnerability that was fixed and patched in December, 2013. We HIGHLY encourage our users to update their DSM.
Furthermore, to prevent spread of the issue we have only enabled QuickConnect and Synology DDNS service to secure versions of DSM.
Please take a look at our official statement with more information here: http://bit.ly/1oypNfE
We sincerely apologize for any problems or inconvenience this issue has caused our users. We will keep you updated with the latest information as we continue to address this issue. |