簡單開啟iPad2 開啟多工手勢 multitasking gestures

本帖最後由 st1000 於 2011-7-23 01:22 編輯

首先部iPad2要JB左

安裝ifile

用ifile 開啟/Applications/Preferences​.app/General.plist, 點Edit, 搵 <string>Mutltitasking_Gest​ure_Group</string> 同 <string>Mutltitasking_Gest​ure_switch</string>
將 "Mutltitasking" 改為 "Multitasking"(delete 左第3個字母 't'). Save

restart iPad2

係setting 就可以見到 multitasking gestures, enable 就可以用啦!




使用方法:
       五指捏合回到主螢幕(效果等於按一下home鍵)
       四指向上推顯示多任務欄(效果等於按兩下home鍵)
       四指左右推切換應用程式(切換至其它background apps)

http://www.youtube.com/watch?v=ZfS9xhpt6ns

或者(感謝CHing cyrux 提供)
Cydia 加 sources (http://repo.weiphone.com) 裝"iOS 4.3 多任務手勢"

早幾日 jb 時同時做埋呢個 setting, 真係好好用.

TOP

本帖最後由 wuchihangfox 於 2011-7-22 16:50 編輯

Cannot find
/Applications/Preferences​.app/General.plist
I am using 4.3.3 JB

ar... cannot do it in iFunBox ?

wrongly search ifle in installous .. should find ifile in cydia..

TOP

Cannot find
/Applications/Preferences​.app/General.plist
I am using 4.3.3 JB

ar... cannot do it in ...
wuchihangfox 發表於 2011-7-22 16:41

install ifile in Cydia

TOP

本帖最後由 AT88 於 2011-7-22 20:23 編輯
This post will show you how to enable multi-touch gestures on your iPad.

Step 1: Make sure your iPad is jailbroken. If not, see our jailbreak section.

Step 2: Launch Cydia and search for “MT Gestures Theme.” Install this app. If you don’t have WinterBoard installed, it will install it as well.

Step 3: Launch WinterBoard and select the right gestures for your device. Close WinterBoard and let your iPad respring.

Step 4: Go to Settings > General > and turn Multitasking Gestures to ON.

That’s it. Now enjoy multi-touch.


資料來源自: idownloadblog.comhttp://www.idownloadblog.com/201 ... ouch-gestures-ipad/

-----------------------------------------------------------------------------------
以下既內容係我自己將以上既英文翻譯成中文並加/減左少少野:
1.) 先JB IPAD

2.) 開Cydia, 然後用佢既 "Search" 功能去找, 打這句 key words "MT Gestures Theme" 去找 "multi-touch gestures"呢個 app. 之後如果部機係冇"WinterBoard" 佢會自動幫你裝埋.

3.) 裝完 "multi-touch gestures" & "Winterboard" , 打開 "Winterboard"(頁面會找到佢個 ICON), 選入而面既"Select themes", 間返比 iPad 2用既裝置gestures. 選完後, 退出就會見"respring", 按下佢, 之後部機就自動Reboot.

4.) 部機自動Reboot完之後, 會入返個iOS, 去返iOS "settings" 內, 選返 "General",  之就會見到 多左個 "Multitasking Gestures"呢個功能既開關, 要選"ON". (如果第一次係見到佢已經"ON"左, 但係都要先按 "OFF",之後再重開"ON", 先至啟動到Multitasking Gestures.)

TOP

資料來源自: idownloadblog.com
AT88 發表於 2011-7-22 19:42


呢個都係其中一個方法! 但我唔想裝WinterBoard嗎!


呢到仲有另一個方法, 不過唔係所有人都做到!

http://www.crunchitech.com/2011/05/multitask-gestures-guide-for-ios-4-3-3/


After the jailbreak people now asking the way of Multi-task Gestures method, it can be possible with the help of Xcode. The steps are so simple

1.        Just download xcode
2.        Install it
3.        Open xcode and select your device
4.        In this new window, click “Use for Development.”
5.        Now login with your Apple Developer use
6.        Close Xcode and close the Settings.app on your iPad from the multitasking tray.
Therefore, in this way you can do Multitasking Gestures for confirmation
Goto Settings.app again, then the “General” tab.
Now here you will find the “Multitasking Gestures” option. By default, this set to on.

TOP

本帖最後由 AT88 於 2011-7-22 19:57 編輯
呢個都係其中一個方法! 但我唔想裝WinterBoard嗎!


呢到仲有另一個方法, 不過唔係所有人都做到!

...
st1000 發表於 2011-7-22 19:51

只係比多個Choice比人間下....冇乜特別意思. 你唔洗下下都起晒鋼咁既.

TOP

只係比多個Choice比人間下....冇乜特別意思. 你唔洗下下都起晒鋼咁既.
AT88 發表於 2011-7-22 19:54


Sorry CHing!  我唔係起鋼, 只係講我點解唔用你俾果個方法遮!
同埋仲有好多方法, 只要google就搵到!

TOP

本帖最後由 AT88 於 2011-7-22 20:56 編輯
Sorry CHing!  我唔係起鋼, 只係講我點解唔用你俾果個方法遮!
同埋仲有好多方法, 只要google就搵到! ...
st1000 發表於 2011-7-22 20:36

其實, 你既第一個方法(開啟 iPad2 既多工手勢)係應該最快既.  只係改左2句野(減左2粒字),之後reboot一次, 再開啟個功能"多工手勢". (要裝左iFile先)

By the way, Winterboard 其實有乜野唔好...? 會食RAM/食電?

TOP

其實, 你既第一個方法(開啟 iPad2 既多工手勢)係應該最快既.  只係改左2句野(減左2粒字),之後reboot一次,  ...
AT88 發表於 2011-7-22 20:49



Cydia 加 sources (http://repo.weiphone.com) 裝"iOS 4.3 多任務手勢"

TOP